CONFIRM THE PART FITS
Part Information
This drum (part number W10541657) is for dryers.
Drum W10541657 rotates during the drying cycle to circulate air around the garments.
Wear work gloves to protect your hands when installing this part.
Frequently Used Together
- $15.77 |11% OFF Phone Price : $17.77
- $34.73 |15% OFF Phone Price : $40.73
- $31.84 |16% OFF Phone Price : $37.84
- $273.69 |$12.00 OFF Phone Price : $285.69
- $39.98 |13% OFF Phone Price : $45.98
- $41.07 |13% OFF Phone Price : $47.07
- $132.55 |8% OFF Phone Price : $144.55
- $111.38
- $68.54 |8% OFF Phone Price : $74.54
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #MED6000XW0 Maytag dryer | MED6000XW0 | Bulkhead parts |
Model #MGD7000AW1 Maytag dryer | MGD7000AW1 | Bulkhead parts |
Model #MED7000AW0 Maytag dryer | MED7000AW0 | Bulkhead parts |
Model #MGD7000AG1 Maytag dryer | MGD7000AG1 | Bulkhead parts |
Model #MED7000AG0 Maytag dryer | MED7000AG0 | Bulkhead parts |
Model #YMED7000AG0 Maytag dryer | YMED7000AG0 | Bulkhead parts |
Model #MGD7000AW0 Maytag dryer | MGD7000AW0 | Bulkhead parts |
Model #MGD7000AG0 Maytag dryer | MGD7000AG0 | Bulkhead parts |
Model #YMED7000AW0 Maytag dryer | YMED7000AW0 | Bulkhead parts |
Model #WHD862CHC1 Whirlpool dryer | WHD862CHC1 | Bulkhead parts |
Reviews
Would be fine if it didn't show up damaged.
Showed up with a dent in the side where the drum rollers ride. Useless now. Supposed to be getting a replacement but no email of confirmation or shipping for two weeks. Not thrilled.
Jay03, Oregon
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Easy to install.
Took about 40 min and was not difficult. Was disappointed in construction of new drum. Seams are not manufactured with quality and could be replacing in a few years again
HOMEREPAIR10, Bottineau, ND
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Due to dryer design, it was difficult to install
Dryer design is bad. Have to completely dismantle it to install It took a few hours. Had to hire someone to finish job. Had it all put together, turned it on, and he said the new drum must be warped because it is isn't just rotating, but rather going up and down too. We considered taking whole thing apart so we could send it back to you, but it became cost prohibitive. Really disappointed.
LNGHmom, Noblesville, Indiana
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- More than 2 hours
Came earlier than expected
I bit the bullet and decided to change out the maytag dryer drum myself. It had developed a crack that makes a loud thumping sound as the dryer runs. It runs like new now!! Thanks to sears parts direct
cl206, Orangeburg,NY
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour