CONFIRM THE PART FITS
Dryer Thermistor (replaces 8577274) WP8577274
Part #WP8577274
Part Information
Helpful DIY instructions: Installation guide.
This thermistor (part number WP8577274) is for dryers.
Thermistor WP8577274 attaches on the blower housing, and monitors and helps regulate the temperature inside the dryer.
Unplug the dryer before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $18.56 |10% OFF Phone Price : $20.56
- $68.54 |8% OFF Phone Price : $74.54
- $41.07 |13% OFF Phone Price : $47.07
- $16.60 |11% OFF Phone Price : $18.60
- $74.48 |7% OFF Phone Price : $80.48
- $35.19 |15% OFF Phone Price : $41.19
- $15.77 |11% OFF Phone Price : $17.77
- $7.23 |12% OFF Phone Price : $8.23
- $28.33 |17% OFF Phone Price : $34.33
- $44.11 |12% OFF Phone Price : $50.11
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #WED9470WW1 Whirlpool dryer | WED9470WW1 | Bulkhead parts |
Model #WED9400ST1 Whirlpool dryer | WED9400ST1 | Bulkhead parts |
Model #WGD9500TW2 Whirlpool dryer | WGD9500TW2 | Bulkhead parts |
Model #MGDE500VF0 Maytag dryer | MGDE500VF0 | Bulkhead parts |
Model #MEDE500VP1 Maytag dryer | MEDE500VP1 | Bulkhead parts |
Model #7MMGE9959TW0 Maytag dryer | 7MMGE9959TW0 | Bulkhead parts |
Model #MED9800TK0 Maytag dryer | MED9800TK0 | Bulkhead parts |
Model #WED9500TC0 Whirlpool dryer | WED9500TC0 | Bulkhead parts |
Model #MGDE500VW0 Maytag dryer | MGDE500VW0 | Bulkhead parts |
Model #MGDE300VW0 Maytag dryer | MGDE300VW0 | Bulkhead parts |
Reviews
Would not buy again
Shipping took way longer than estimated. Delayed anticipated repair by a week
Bim de Bow, Ma
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Part didn't work
Tried to install part but part didn't have any continuity and did not work. Returned part
KACO, Indiana
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Thermistor restores 21-year old electric dryer!
Replacing the dryer thermistor. The only challenge was getting the lower front panel open
Jerry W, Scottsdale, AZ
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Easy order, easy install over priced
The dryer was blowing cold air. I made a couple measurements on the thermistor and it didn't seem to have the correct resistance. The ordering was easy and so was the install. This appears to have improved my dryers behavior. The price is way too high. The alternatives online were below $10. BUT, the reviews on the alternatives indicated a high failure rate so I chose to go with original parts.
Steve, Frederick,MD
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
part easy to install, part shipping questionable
The dryer was not drying properly due to thermistor not always working, replaced thermistor and started heating correctly but also found the vent was partially plugged near roof of house. Also shipping was what I considered questionable the part was shipped in a bubble pack through the mail and got some minor damage from the sorting equipment, with part being a electrical part should have been packaged in a box to help avoid damage.
Silverstreak, Ohio
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Thermistor
I had to straighten the contact probes since the item was shipped in a flat mailer and the USPS did their best to destroy it.
Ralph, Long Beach, CA
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
WORST PURCHASE EVER
The experts repair dept. prescribed the wrong part, requiring a home visit from a technician who said exactly that. Spent hours on the phone with customer service and was transferred back and forth between 6 different departments, to no satisfaction or resolution.
GMGLEO, South-central PA
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
It was ok to install but a little tight to put in.
I used to work with the Sears HVACR Dept bck in the middle of1996, to the qtr of 1998. I've worked on HVAC, Refrigeration, serviced equipment and have experience on certain appliances like HVAC, Refrigerator/Freezers, some kitchen appliances, so I'm mechanically- inclined to do that kind of kitchen appliance part installation .
Dragon1, Crownsville, MD 21032
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend