Lawn Tractor Drive Pulley (replaces 123666X, 12366X) 532123666

Easy to fit

Good quality. Easy to install. RnR old rusty pulley.

Ease of Installation

Very Easy

Duration of Installation

30 minutes - 1 hour

Yes, I would recommend this to a friend

High quality replacement part

Required patience a 1" bimetal hole saw, gear puller, and heat to remove (MAP Gag hand torch). After dropping the rear axle assembly and removing the circlip on top of the shaft I sprayed PB Blaster to try to loosen the rusted on pully. My machine was manufactured in 1998 this post as of this post May 4, 2021, 23 years later. 24 hours after multiple applications of PB Blaster I drilled 2 1 inch holes through the pully near the center hub so my gear puller had a place to grip the pully near the hub. Using multiple applications of heat / Ice on the input shaft, and leverage from the gear puller, I was able to move the pully off the input shaft, this is where patience is important. I took many sanity breaks and again let the PB Blaster work into the stuck pully hub. Finally after about 2 1/2 or 3 Hours I was able to remove the old pully and installing the new pully was easy grease the input shaft and new pully hub then using a block of wood and a mallet to gently drive the new pully in place.

Ease of Installation

Very Difficult

Duration of Installation

More than 2 hours

Yes, I would recommend this to a friend

perfect

perfect fit seems to be working good. I had to cut the old one off

Ease of Installation

Moderate

Duration of Installation

30 minutes - 1 hour

Yes, I would recommend this to a friend

Easy to install

I installed on my lawn tractor trans-axle. It fit perfect.

Ease of Installation

Very Easy

Duration of Installation

Less than 30 minutes

Please send me a return label

I found out it was not my pull that was bad it was the shaft that holds the pully so I need to return it . Please send me a return label

Ease of Installation

Very Easy

Duration of Installation

Less than 30 minutes

Fits just right.

Needed a new transaxle for my Craftsmen Lawn Tractor. Had to order the pulley as I could not get the old one off from the old transaxle.

Ease of Installation

Moderate

Duration of Installation

More than 2 hours

Direct replacement

Came fully galvanized. What can I say? Looked and fit like original except brand new.

Ease of Installation

Moderate

Duration of Installation

30 minutes - 1 hour