CONFIRM THE PART FITS

Dryer Timer (replaces 696919) WP696919

Part #WP696919

Online Only Price
$163.09
7% OFF Phone Price : $175.09
In Stock
For ZIP codes near Edit
60-day return policy

Part Information

Special details: If the dryer timer advances in the timed dry cycle but not the automatic moisture sensing cycle, the problem could be the moisture sensing control board. If you replace the moisture sensing control board and the timer still won't advance in the moisture sensing cycle, replace timer WP696919.

This timer (part number WP696919) is for dryers.

Timer WP696919 controls the electrical components and the duration of the dryer cycles.

Unplug the dryer before installing this part. Wear work gloves to protect your hands.

Reviews

Timer timed just right
January 08, 2022

Overall an easy install. Take your time and remove / replace each individual wire from old to new. Just be careful not to break old connections.

Jersey b, Hudson Valley

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Anyone can do this
November 14, 2021

My old timer just kept cycling through all the drying modes. The drum stopped, but the timer just kept clicking away through the next and next and next mode. Nothing to fear, easy to install. Move dryer away from wall, open panel, disconnect old wires while reconnecting to new part, replace panel and done.

Preppy d, Atlanta Ga

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes

Yes, I would recommend this to a friend

Excelent Experience All-around
November 25, 2020

The ordering process was easy and the part arrived quickly. I installed it in less than 30 minutes saving ~$800 that I would have had to spend to replace the dryer.

BearkatBB, Huntsville, TX

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes

Yes, I would recommend this to a friend

Perfect part, flawless operation
September 11, 2020

Kenmore gas dryer stopped working . Did some trouble to shooting and determined it must be the timer. It was. Easy install, good price. I saved hundreds of dollars doing it myself. Appliance repair book helped determine what was broken and required replacement.

KenKGB, South River, NJ

Did you find this review helpful?

Ease of Installation
Difficult
Duration of Installation
Less than 30 minutes

Yes, I would recommend this to a friend

So easy, even a girl could do it
February 04, 2019

Unscrew timer from mount, replace wiring wire for wire, install new timer and presto, done.

Power R, Springfield OH

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes
Piece of cake
January 20, 2019

Unplug dryer, remove screws from back panel, remove 2 retaining screws, transfer wires, reinstall screws, plug in, done... Couldn't have been easier. :)

Pirant, Los Angeles

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes
Easy installation
May 02, 2018

Electrics are always easier than electronics -- just switch wires one at a time from the old one to the new one.

dilbert, Undisclosed

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour