- Kenmore refrigerator water filters
- Whirlpool refrigerator water filters
- Samsung refrigerator water filters
- GE refrigerator water filters
- LG refrigerator water filters
- Frigidaire refrigerator water filters
- KitchenAid refrigerator water filters
- Maytag refrigerator water filters
- Kenmore Elite refrigerator water filters
- Estate refrigerator water filters
- GE Profile refrigerator water filters
- Amana refrigerator water filters
- Bosch refrigerator water filters
- Dacor refrigerator water filters
- Electrolux refrigerator water filters
CONFIRM THE PART FITS
Frigidaire Freezer Door Gasket (replaces 216522303) 5304507202
Part #5304507202
Online Only Price
$129.55 |Â
8% OFFÂ Phone Price : $141.55
In Stock
For ZIP codes near Edit
This part fits
Previous part number
Part #216522303
Part Information
Basic Information
- Part Name: Freezer Door Gasket
- Manufacturer: Frigidaire
- Category: Freezer
- Primary Function: Creates a seal around the freezer door to prevent warm air from entering, ensuring the appliance maintains the correct internal temperature.
Installation & Compatibility
- Compatible Models: Fits various Frigidaire freezer models; please confirm this part is correct for your model before ordering.
- Installation Difficulty: Medium — Proper installation requires precision to ensure an airtight seal.
- Tools Required: Work gloves for protection during installation.
Additional Information
This Freezer Door Gasket is designed to replace part number 216522303. One special consideration when installing gasket 5304507202 is to smooth out any folds and creases by soaking it in warm water or using a hair dryer on low heat. This process ensures an optimal seal and maximum efficiency of your freezer.
Before installation, ensure that the freezer is unplugged and all perishable food items are safely stored to prevent spoilage. Handle the gasket with care, wearing appropriate gloves to protect your hands and ensure no damage is caused to the gasket during fitting.
For the best results, follow these tips to ensure a proper seal and maintain the efficiency of your freezer.
Frequently Used Together
- $55.17 |Â10% OFFÂ Phone Price : $61.17
- $42.74 |Â12% OFFÂ Phone Price : $48.74
- $103.44 |Â10% OFFÂ Phone Price : $115.44
- $28.91 |Â17% OFFÂ Phone Price : $34.91
- $29.95 |Â35% OFFÂ Was : $45.97
- $88.52 |Â6% OFFÂ Phone Price : $94.52
- $71.16 |Â8% OFFÂ Phone Price : $77.16
- $37.97 |Â14% OFFÂ Phone Price : $43.97
- $19.87 |Â9% OFFÂ Phone Price : $21.87
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #FFU12K0DW2 Frigidaire upright freezer | FFU12K0DW2 | Door |
Model #FFU1212DW2 Frigidaire upright freezer | FFU1212DW2 | Door |
Model #UL1293CA6 Crosley upright freezer | UL1293CA6 | Door |
Model #GFU12M2AWA Gibson upright freezer | GFU12M2AWA | Door |
Model #25326202100 Kenmore upright freezer | 25326202100 | Door |
Model #25326202101 Kenmore upright freezer | 25326202101 | Door |
Model #25324212102 Kenmore upright freezer | 25324212102 | Door |
Model #FFU12K1DW2 Frigidaire upright freezer | FFU12K1DW2 | Door |
Model #FFU1212DW3 Frigidaire upright freezer | FFU1212DW3 | Door |
Model #CFU12M2AW9 Universal/Multiflex (Frigidaire) upright freezer | CFU12M2AW9 | Door |
Reviews
Too floppy - wouldn't fit correctly
We double-verified the part numbers with our freezer model to ensure we ordered the correct part. But the gasket appeared to be a generic - one size fits all - sort of item. The gasket was much more floppy and felt like it was out of shape. One side might fit okay but it was too stretched on the other side. Bottom line... we still had the same problem with an improperly sealing freezer door. Ended up returning the gasket and buying a new freezer.
murphy, alabama
1 person thought this review was helpful.
- Ease of Installation
- Very Difficult
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Freezer Door Gasket
This gasket is easy to install if you take your time. Please note, that some gaskets simply push on / off. But some are actually tucked behind a plastic sleeve that must be removed first. Make sure you know how your gasket is installed. Some door sleeves are held in place by stainless sheet metal screws. Lifting on the old gasket will allow to find these screws. You may have to stretch the old gaskets. Warm water works. Again , take your time and go slow because you don't want or need a tear. After removing the old gasket clean all sealing surfaces. If you have some rust a little CLR will do the trick.
whatever, texas
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy to install alittle time consuming
It was easy to install. I put it on then let it sit for 3 days to allow it to form to the upright freezer door frame before i plugged in my freezer. Once my freezer had been running for 24 hours i then lightly ran my hand around the whole door frame checking for any cold air leaks. This gasket works perfectly. I am very happy with it.
Dodo1, Indianapolis, Indiana
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
good product works as advertised
I installed it without problem, especially after reviewing instructional video, a piece of cake to install
john, marysville, wa
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy to replace freezer door gasket.
Before taking your freezer door off, do a quick check to make sure the gasket size is correct. Recommend to wipe clean the gasket and place it flat on the floor. Make sure no there is no damages to the gasket. Use the heat gun (hair dry) to flat out any kinks/twists in the gasket. Take freezer door off and place it flat on the floor. If you're not use to this type of work, take note of how the old gasket oriented and stalled on the door. Loose up all the screws around the frame, but do not remove them. Gasket is easily removed, after all the screws are loosen up. Remove old gasket and replace with new gasket. Start from one corner, slide the gasket in under the frame. Instead of go around to the next corner, go to the opposite diagonal corner. This way, you stretch the gasket out more evenly. After slide the gasket in, from both opposite corners, work around to have the gasket slid in under the frame. Make sure it is stretched out evenly all around before tighten all the screws. Suggest to start tighten the screws, start from the middle out to both corners. High tight is good. Don't want to over tighten you may strip the screw.
John, Boston, MA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy to install but problem persists
It was easy to install gasket following online videos. Unfortunately, gap along door remains.
Law101, Lincoln, NE
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Gasket replacement
Wrong size still waiting for correct gasket people on phone have trouble speaking English and just wants to complete an order
Patrick, Tiverton RI
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
Wrong size
I ordered the right size but received the wrong size so had to return. Had to reorder, now waiting and hoping it is the right size.
Joeg, Texas
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend