$14.04 |Â
12% OFFÂ Phone Price : $16.04
CONFIRM THE PART FITS
Seal W10352407
Part #W10352407
Replaced by #W10612022
?
Manufacturer substitution
This part replaces W10352407. Substitute parts can look different from the original.
Online Only Price
$57.86 |Â
9% OFFÂ Phone Price : $63.86
In Stock
For ZIP codes near Edit
Part Information
This drum seal (part number W10612022) is for dryers.
Drum seal W10612022 seals the drum to prevent air from escaping.
Follow the instructions in the owner's manual when installing this part.
Frequently Used Together
- $12.18 |Â14% OFFÂ Phone Price : $14.18
- $16.46 |Â11% OFFÂ Phone Price : $18.46
- $27.43 |Â18% OFFÂ Phone Price : $33.43
- $96.62 |Â11% OFFÂ Phone Price : $108.62
- $43.82 |Â12% OFFÂ Phone Price : $49.82
- $29.67 |Â17% OFFÂ Phone Price : $35.67
- $19.12 |Â9% OFFÂ Phone Price : $21.12
- $32.94 |Â15% OFFÂ Phone Price : $38.94
- $42.41 |Â12% OFFÂ Phone Price : $48.41
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #MED5630TQ0 Maytag dryer | MED5630TQ0 | Bulkhead parts, optional parts (not included) |
| Model #MGD5630TQ1 Maytag dryer | MGD5630TQ1 | Bulkhead parts |
| Model #KGYS850LT1 KitchenAid dryer | KGYS850LT1 | Bulkhead parts |
| Model #CGD126SDW1 Crosley dryer | CGD126SDW1 | Bulkhead parts |
| Model #CGD126SBW2 Crosley dryer | CGD126SBW2 | Bulkhead parts |
| Model #CED126SDW0 Crosley dryer | CED126SDW0 | Bulkhead parts |
| Model #CED126SBW0 Crosley dryer | CED126SBW0 | Bulkhead parts |
| Model #LEN1000HQ1 Whirlpool dryer | LEN1000HQ1 | Bulkhead |
| Model #LGN1000HQ1 Whirlpool dryer | LGN1000HQ1 | Bulkhead |
| Model #LGN1000HQ0 Whirlpool dryer | LGN1000HQ0 | Bulkhead |
Reviews
Slightly small but maybe designed that way.
The seal needed to stretch some to fit which was difficult with the need to glue it down. I put the seal on to the point it would need to be stretch and glued it down and clamped it. Let it sit for about an hour then put on more clamps to keep it in place and stretched it over the rest then clamped that down and let it dry for about an hour before removing the clamps. It stayed without pulling off and installation was a breeze after that.
Daniel, Arkansas
1 person thought this review was helpful.
- Ease of Installation
- Moderate
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
Glue was hard
I ordered the rear seal for the drum along with the glue. It took two months to get here and when I went to install the glue that was sent with it was junk.
JamesD, Pennsylvania
1 person thought this review was helpful.
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Super easy to install
Went on fast and easy and made a big difference in how the dryer works and sounds.
Disappointed, Newago Michigan
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
The part was back ordered. Finally delivered with
The backordered belt was finally delivered with a completely used up tube of glue. I need a full, new tube of glue in order to complete the installation of the dryer rear drum belt.
Harry, Berlin, Maryland
1 person thought this review was helpful.
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
Still going . . .
We have a Kenmore washer and dryer that are about to hit 25 years and they both are going strong. Being able to get parts and watch a video or two have made repairs a breeze. Our dryer was sounding off, we discovered it was the seal in the back. Looked up some videos, ordered the part and bam, back in business! Super easy to install and dryer sounds healthy again.
Yoda64, Rancho Murieta, CA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
yes easy to install
took me 10 minutes to get it glued on the drum. I had my wife help me apply the felt around the rear drum, made it easier while gluing.
Dan t f i m, Lombard IL
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Melting pieces on inside of drum
Had it here for the repairman i had ordered up. Fit fine and repair was well done.Glue drying took the most time and patience.
fcraccdf, Windsor, CA
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Works great!
Relatively easy to install. Just watched a 3 minute YouTube video.
Britney, Oregon
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend