$14.74 |Â
12% OFFÂ Phone Price : $16.74
CONFIRM THE PART FITS
Dryer Drum Front Bearing (replaces 692526) 279441
Part #279441
Online Only Price
$43.72 |Â
12% OFFÂ Phone Price : $49.72
In Stock
For ZIP codes near Edit
This part fits
Part Information
Helpful DIY instructions: Installation guide with video.
This drum front bearing (part number 279441) is for dryers.
Drum front bearing 279441 supports the front of the dryer drum and reduces friction as the drum rotates.
Unplug the dryer before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $15.98 |Â11% OFFÂ Phone Price : $17.98
- $42.54 |Â12% OFFÂ Phone Price : $48.54
- $12.56 |Â14% OFFÂ Phone Price : $14.56
- $26.63 |Â18% OFFÂ Phone Price : $32.63
- $56.17 |Â10% OFFÂ Phone Price : $62.17
- $93.81 |Â6% OFFÂ Phone Price : $99.81
- $18.56 |Â10% OFFÂ Phone Price : $20.56
- $6.53 |Â13% OFFÂ Phone Price : $7.53
- $7.55 |Â12% OFFÂ Phone Price : $8.55
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #MED5630TQ0 Maytag dryer | MED5630TQ0 | Bulkhead parts, optional parts (not included) |
| Model #MGD5630TQ1 Maytag dryer | MGD5630TQ1 | Bulkhead parts |
| Model #KGYS850LT1 KitchenAid dryer | KGYS850LT1 | Bulkhead parts |
| Model #CGD126SDW1 Crosley dryer | CGD126SDW1 | Bulkhead parts |
| Model #CGD126SBW2 Crosley dryer | CGD126SBW2 | Bulkhead parts |
| Model #CED126SDW0 Crosley dryer | CED126SDW0 | Bulkhead parts |
| Model #CED126SBW0 Crosley dryer | CED126SBW0 | Bulkhead parts |
| Model #LEN1000HQ1 Whirlpool dryer | LEN1000HQ1 | Bulkhead |
| Model #LGN1000HQ1 Whirlpool dryer | LGN1000HQ1 | Bulkhead |
| Model #LGN1000HQ0 Whirlpool dryer | LGN1000HQ0 | Bulkhead |
Reviews
Customer support exceptional
Realized forgot to order additional parts other than bearing. Customer Support added the other needed parts and shipped without additional shipping charges.
Michelle, Colorado Springs
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Great price and selection
Only needed a 6 in 1 screwdriver to complete repair.4 screws is all that that needs to be removed.
none, phoenix az
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
So far so good
Dryer was squeaking and replaced front dryer bearing and bought a kit with a new belt, rollers and idler arm. It stopped the squeak and was easy to install. It took about an hour to install the parts. Bought for 29 inch electric Kenmore dryer.
Dryerdan, St. Louis
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
It Was the Correct Part!
Excellent! The part was correct. Installation was easy, although I should have realized that I needed to start from the middle and work toward both ends.
Al003, Detroit
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Super easy to install!
It only took a few minutes to install myself and very happy that it was that easy to do!
Savysingle, Euless
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
THANKS
snap one out and snap the new one in . its that simple once you get the 2 screws out undo the door safety switch connector an tilt the panel forward a little and lift and put aside but not to far cause the parts really do snap out and in. 20 mins tops. 5/16 nut driver and small screwdriver to loosen connector with. simple.
flatcroaker, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Easy repair
The parts arrived in a few days, and they were the exact parts needed. Install was straightforward and done in about an hour, and the dryer drum turns smoothly and quietly again.
Jeff S, Iowa
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Front bearing install
Snapped in and works well. Easy if you know what you're doing.
Roger J, Wayne NJ
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour