CONFIRM THE PART FITS
Refrigerator Door Gasket, Right 4987JJ2002S
Part #4987JJ2002S
Part Information
Special details: Smooth folds and creases in gasket 4987JJ2002S by soaking it in warm water or warming it with a hair dryer on low heat.
This door gasket (part number 4987JJ2002S) is for refrigerators.
Door gasket 4987JJ2002S creates a seal around the door to prevent warm air from entering the refrigerator.
Safely store any food that could deteriorate while the door is open for this repair.
Frequently Used Together
- $6.98 |13% OFF Phone Price : $7.98
- $65.17 |8% OFF Phone Price : $71.17
- $42.93 |12% OFF Phone Price : $48.93
- $120.82 |9% OFF Phone Price : $132.82
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #79572023110 Kenmore bottom-mount refrigerator | 79572023110 | Door parts |
Model #LMX28987ST LG bottom-mount refrigerator | LMX28987ST | Door parts |
Model #LFX21980ST/01 LG bottom-mount refrigerator | LFX21980ST/01 | |
Model #LMX25981ST/00 LG bottom-mount refrigerator | LMX25981ST/00 | |
Model #LMX21981ST/00 LG bottom-mount refrigerator | LMX21981ST/00 | |
Model #LFX28977ST/00 LG bottom-mount refrigerator | LFX28977ST/00 | Door parts |
Model #LMX28983ST LG bottom-mount refrigerator | LMX28983ST | Door parts |
Model #LFX21971ST/01 LG bottom-mount refrigerator | LFX21971ST/01 | |
Model #LFX25980ST/01 LG bottom-mount refrigerator | LFX25980ST/01 | |
Model #LFX25975ST/03 LG bottom-mount refrigerator | LFX25975ST/03 | Door parts |
Reviews
Lubrication of the Gasket is the key
Much easier than I had anticipated. Removing the old gaskets was harder than installing the new gaskets. After installing them they seemed "tight", hard to close. So, I lubricated the hinge side first. That helped loosen up the closing of the doors. Yet, it was still "tight" so I lubricated the door handle sides, that was the answer to them being closed easier. I would say that will keep them from tearing apart on the handle sides for as long as this frig will "live".
perle37, Salem, Oregon
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Removing and installing Kenmore right door gasket
I purchased the gasket to replace my original gasket which was tearing at the top. I found several videos on Youtube that showed the process of removing and replacing the gasket. Taking it off and putting the new one on was very easy. Only needed a flat blade screw driver. You need to be sure that you slide the gasket on the handle side of the door so that it fits into the groove at the top when you press in.
William J, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Gaskets not flush at top
These gaskets are poorly designed or manufactured in that the top corners are not flush and rub against each other causing them to fail at that point. this is the second time I have had to replace them and the new set fits no better.
AL T, albuquerque, NM
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy to install
Worked perfectly, was easy to install. Bad design. Gasket will fail again.
hparris1, Utah
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Very poor quality
The gasket came in already damaged, top dollar paid for piece of junk, doesn't compare to original LG part at all, very disappointed
Kruchina, Roseville, CA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Easy to install
Took a very short time to install about 15 min, googled install and found lots of vids
Bobbiy, NV
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Delivered quikly and easy to install.
The product was a perfect fit and installed easily with the help of a YouTube video.
Tommie T B, Youngstown, Ohio
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
very difficult to work with
I have done the repair before. It is not hard just tedious. Gasket design not the best so if doors are not closed just right sometimes, they will catch on each other and get bent out of shape and tear so you are forced to replace.
stevew, Odessa, TX
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour