$76.66 |Â
7% OFFÂ Phone Price : $82.66
CONFIRM THE PART FITS
Flow Meter 8181696
Part #8181696
Replaced by #WPW10110225
?
Manufacturer substitution
This part replaces 8181696. Substitute parts can look different from the original.
Online Only Price
$78.37 |Â
7% OFFÂ Phone Price : $84.37
In Stock
For ZIP codes near Edit
This part fits
Part Information
Inlet flow meter WPW10110225 is an original equipment manufacturer (OEM) part that fits some front-load washers in the following series: Kenmore and Kenmore Elite 110; Whirlpool 7MGH, 7MWF, GHW, WFL and WFW; Maytag 7MMH, MFW, MHW and MHWE; and KitchenAid KHW.
Inlet flow meter WPW10110225 measures the amount of water entering the washer.
Replaces original front-load washer inlet flow meter part numbers W10110025 and 8181696.
Frequently Used Together
- $53.99 |Â10% OFFÂ Phone Price : $59.99
- $6.47 |Â13% OFFÂ Phone Price : $7.47
- $60.99 |Â9% OFFÂ Phone Price : $66.99
- $118.17 |Â9% OFFÂ Phone Price : $130.17
- $387.99 |Â$12.00 OFFÂ Phone Price : $399.99
- $178.93 |Â6% OFFÂ Phone Price : $190.93
- $43.73 |Â12% OFFÂ Phone Price : $49.73
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #7MGHW9150PW2 Whirlpool washer | 7MGHW9150PW2 | Dispenser parts |
| Model #11047892701 Kenmore Elite washer | 11047892701 | Dispenser |
| Model #11049962601 Kenmore Elite washer | 11049962601 | Dispenser parts |
| Model #11049972601 Kenmore Elite washer | 11049972601 | Dispenser parts |
| Model #11047882701 Kenmore Elite washer | 11047882701 | Dispenser parts |
| Model #11047852701 Kenmore Elite washer | 11047852701 | Dispenser parts |
| Model #MHWE950WW00 Maytag washer | MHWE950WW00 | Dispenser parts |
| Model #MHWE950WW01 Maytag washer | MHWE950WW01 | Dispenser parts |
| Model #7MMHW7000YG0 Maytag washer | 7MMHW7000YG0 | Dispenser parts |
| Model #7MGHW9150PW1 Whirlpool washer | 7MGHW9150PW1 | Dispenser parts |
Reviews
Just what I needed
Original issue of a clogged inlet valve but should have replaced the flow meter at the same time. The hardest part is taking the dryer off the washer (stackable). Got them both quickly from sears! Thank you.
Eralph, WI
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy to install
The part was easy to install and fixed my washer, which would not complete the wash cycle and was displaying "H F" error code.
Richard, Rowlett, TX
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Fixed it myself!
The part I received was not identical to the part I replaced which made me worry the wrong part had been sent. My washer is a few years old so I suspected modifications had happened. (The part I received was black and smaller than the part I removed.) It took me about 15 minutes to install the part and I ran two loads of laundry without getting the F20 error. Hurray!
Gene, Junction City, KS
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Whole thing took 2min!
Seriously I was surprised to see how quick And easy it was to swap the old with the new. My washer is like new-I am very grateful and happy with my purchase!
Kathleen, South Jersey
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Flowmeter easy fix
My 16 year old Kenmore washer was reporting F/H and diagnostics indicated problem was either flowmeter or solenoids. I ruled out a solenoid issue since I could see water was entering the tub. 3 screws to remove the top, 2 clamps to remove on the flowmeter. Easy quick fix. I found a video on line that helps. Screws are a torque T20 size, but you can use a hex wrench instead.
Bill, St Louis
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
I was shipped the wrong part
I put in my model number, and the flow meter it suggested for my washer ended up to be the wrong meter, and as a result I had to spend extra money to have my machine fixed. Had they shipped me the correct part, it would have had saved me time, energy, and money.
RayMoro, Los Angeles
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Worked out great
Flow meter stopped working on my Kenmore elite front load Changed it out and now works great
Birdman, Chicago
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Pretty easy to install
I'm a single mom and I had it done in about 20 min.
Ali04, Alaska
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend