$14.49
CONFIRM THE PART FITS
Part Information
This oven burner igniter (part number W10918546) is for ranges.
Oven burner igniter W10918546 ignites the gas to light the oven burner.
Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $6.60 |13% OFF Phone Price : $7.60
- $93.93 |6% OFF Phone Price : $99.93
- $42.80 |12% OFF Phone Price : $48.80
- $38.73 |13% OFF Phone Price : $44.73
- $43.16
- $56.59 |10% OFF Phone Price : $62.59
- $18.89 |10% OFF Phone Price : $20.89
- $4.46 |18% OFF Phone Price : $5.46
- $78.16
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #WFG231LVQ1 Whirlpool gas range | WFG231LVQ1 | Manifold parts |
| Model #WFG231LVB1 Whirlpool gas range | WFG231LVB1 | Manifold parts |
| Model #WFG231LVS1 Whirlpool gas range | WFG231LVS1 | Manifold parts |
| Model #WFG231LVS0 Whirlpool gas range | WFG231LVS0 | Manifold parts |
| Model #WFG231LVB0 Whirlpool gas range | WFG231LVB0 | Manifold parts |
| Model #WFG231LVQ0 Whirlpool gas range | WFG231LVQ0 | Manifold parts |
| Model #SF3020EKW1 Whirlpool gas range | SF3020EKW1 | Manifold parts |
| Model #IGS350BW0 Ikea gas range | IGS350BW0 | Manifold parts |
| Model #SF3020EKT1 Whirlpool gas range | SF3020EKT1 | Manifold parts |
| Model #SF3020EKN1 Whirlpool gas range | SF3020EKN1 | Manifold parts |
Reviews
Ignitor working great now
This part was easy to replace. Our oven had gotten slower and slower to heat up and then finally quit working. Replaced the ignitor and the burner turns on in less than 30 seconds now.
Tommy, Silsbee, Tx
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Dissapointed
I did not get a confirmation email for my order. Now I don't have the order number to return the part that I need to return.
NOIL, Illinois
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Not correct connector clip.
Wrong clip. Used old igniter's clip and had to use ceramic wire nuts to make it work. A bit frustrating.
Sean V, Carbondale, CO
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Very easy to install.
Took no time at all to install and I was very satisfied with my overall purchase.
Dean, Lynn, MA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
One whole piece!
The part was in one piece! I had ordered one from parts service and it was all busted up, no way to contact them . Sears guaranteed the part!
Lastcowgirl, Arkansas
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Easy to install
It took maybe at most 15 minutes to install. Very simple . Cooking again now
Oven i w, Usa
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Perfect and easy install.
Part was an exact replacement, but the price seams a little much.
Dan13, Champlin, MN
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
It was very simple and easy to install
I had to install a burner igniter on a whirlpool oven. My advice to everyone is to make sure when doing repairs to carefully read the instructions it will always keep you safe.
DK4558, Philadelphia pa
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour