CONFIRM THE PART FITS

Refrigerator Door Outer Panel (Stainless) 297353512

Part #297353512

This part is no longer available.

We've permanently sold out of this part. It's no longer available from the manufacturer and the manufacturer has no substitute for this part. Although our call center staff is always happy to help when possible, they don't have access to this part. If you can't find that part and decide to replace the product, we invite you to visit www.sears.com

This part fits

Part Information

This door outer panel (part number 297353512) is for refrigerators.

Door outer panel 297353512 is the exterior section of the refrigerator door, and attaches to the door inner liner.

Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part. Wear work gloves to protect your hands.

Top models using the same part

Model NameModel NumberDiagram Name
Model #25344743111 Kenmore Elite refrigerator25344743111
Model #25344743110 Kenmore Elite refrigerator25344743110

Reviews

Time Comsuming
May 08, 2018

Remove all shelves from interior door panel. Then unscrew top hinge from refrigerator and lift door off bottom hinge. Remove front handle and handle screws from door and lay door down on flat surface. Remove interior door panel by removing all screws around gasket. Using a battery powered screw gun here will save a ton of time. If possible, leave gasket on interior panel during and after removal. Lay new door panel on flat surface and attach old interior door panel and door gasket, making sure gasket is secured behind lip of interior panel. Set door back on bottom hinge of refrigerator and line-up and reattach top hinge. Once door is secure, check to make sure gasket is sealing properly when door is closed and screw-in door handle screws through openings in new door front. Reattach handle and tighten with Allen wrench. Replace shelves on interior panel. Finally, peel off protective film from door panel. For me, this was the most frustrating part... that stuff did NOT want to be removed. This process should take about an hour for an average DIY person. It's a good idea to have a helper available when re-hanging door on hinges. It's possible to do alone, but much easier with a helper.

Rental M, Virginia

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour