Washer Wire Harness (replaces 6877ER1016L) 6877ER1016F

A snap

Very easy to replace. Note you will need a zip tie to secure the wire at the bottom. This is a highly likely location for a problem as motion of the tub wiggles the wire harness and may eventually fatigue and break the wires. I decided to replace both this harness and the hall sensor and it worked like a charm.

Ease of Installation

Very Easy

Duration of Installation

Less than 30 minutes

Yes, I would recommend this to a friend

LG Motor Wire Harness, looks authentic work great.

I got this with the Power Noise Filter and Control Board. After 8 years of use, I think the old Harness got a short and caused the other two to compensate, subsequently burning them out. The Harness is a little difference in appearance from the original, but all the visible wires and plugs matched. It also looks like they added more protection to spots that might rub. Putting it in did not take long, maybe 30 minutes. Took extra time to make sure it was in right, and everything was put back. Worked great through all my tests so far. Ran a few complete wash and dry cycles as well as a tub clean. Everything is working again.

Ease of Installation

Moderate

Duration of Installation

30 minutes - 1 hour