Refurbished Dryer Electronic Control Board 3980062R

Part #3980062R

This part is no longer available.

We've permanently sold out of this part. It's no longer available from the manufacturer and the manufacturer has no substitute for this part. Although our call center staff is always happy to help when possible, they don't have access to this part. If you can't find that part and decide to replace the product, we invite you to visit www.sears.com

Accessories normally included with new product purchases or listed in the owner's manual may not be included with this reconditioned product. The product may differ in appearance from the product image shown here. Only ground shipment is available for this item. This reconditioned/refurbished part has the same guarantee as a new part. The availability of a reconditioned part cannot be guaranteed. If the reconditioned part is not available you will receive notification within six business days.

This reconditioned/refurbished part has the same guarantee as a new part. The availability of a reconditioned part cannot be guaranteed. If the reconditioned part is not available you will receive notification within six business days.

Part Information

Special details: You may need to replace electronic control board 3980062R if the console won't light up and the dryer is plugged into a working outlet.

This refurbished electronic control board (part number 3980062R) is for dryers.

Electronic control board 3980062R manages the functions of the dryer such as drying time and temperature.

Unplug the dryer before installing this part. Wear work gloves to protect your hands.

Reviews

I would buy again.
August 07, 2023

Ordered a refurbished circuit board for my clothes dryer. It came a day earlier than expected and it works just fine. I'm going to order one for my range too.

Jeannie K, Oregon Coast

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes

Yes, I would recommend this to a friend

Control Board worked for 20 minutes
December 08, 2021

The Dryer started immediately after the Control Board was installed but then stopped. Finally paid for a technician to diagnose and he determined the new Control Board was defective as jumping across the Motor relay showed the dryer was otherwise functioning. Returning the Control Board today. These are all remanufactured and no New production exists. i am ordering a board from another website now.

E. S, Detroit, Michigan

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Exact replacement -- perfect!
October 05, 2021

One of the pads on the starting relay had shorted to the frame -- unknown reasons -- insect perhaps? Sears Direct chat confirmed that the part as right for my Maytag. Simple plug-n-play replacement. Part? under $100. Dryer as good as new!

Kip H, Mid-Hudson Valley, NY

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Easy Install
July 24, 2021

The install of the part was very quick. Fit exactly and got my dryer up and running. As long as you pay attention dieing disassemble the repair should take less than 30 minutes total.

Mike01, Delight, AR

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes

Yes, I would recommend this to a friend

Great quality
May 08, 2021

Great quality and easy to install. Quick shipping as well.

Jmaff01, Blackwood, NJ

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes

Yes, I would recommend this to a friend

Dryer Control Panel??!!
April 26, 2021

Excellent timing, the dryer is up, hot and running??!!

AliceD, Glendale California

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes

Yes, I would recommend this to a friend

First Replacement was Faulty, Second Worked
April 23, 2021

This appears to be the exact replacement for our Kenmore Elite HE3 board where the motor circuit burned out, even if that model is not listed. The first board we received did not repair the problem, and actually failed some of the additional electronic button tests. We decided to try once more; ordered an additional board and returned the faulty one. Whoo-hoo - the second board works great, and this time we received a label to recycle the original blown-out board, so a win all the way around. Very relieved to not replace the entire dryer.

Jimm, Nebraska

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Yes
April 21, 2021

Very easy fix you just take the top lid off and it's right there on the left hand side

Harry, Rockford,IL

Did you find this review helpful?

Ease of Installation
Very Difficult
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend