Official Craftsman power tool parts

Most common Sears tool parts that need replacing in Craftsman power tools

1. Battery. The power tool battery provides the electric current needed to run the drive motor. Replace the battery if it won't recharge.
2. Carbon motor brushes. Carbon motor brushes transfer electric current to the spinning armature in the motor. You'll need to replace carbon motor brushes when they wear down to ¼-inch in length.
3. Trigger switch. The trigger switch starts and stops the power tool motor. Replace the trigger switch if it doesn't send current to the drive motor when you pull the trigger.
4. Drive motor. The drive motor spins the chuck and screwdriver bit to drive screws into the work piece. Replace the drive motor if it doesn't run when it gets electrical current.

Work area safety guidelines to follow when using Craftsman power tools

• Work in a well-lit area so you can clearly see the work piece and the location of the power tool blade or bit.
• Make sure that your work area is well-ventilated. Don't operate your power tool in the presence of flammable liquids, gases or dust.
• Keep children and bystanders away from the work area when operating the power tool. Distractions can cause you to lose control of the power tool.
• Wear work gloves to protect your hands and eye protection when using the power tool.

Sears PartsDirect has the Craftsman power tool parts you need to fix any type of problem

Trust Sears PartsDirect to have the Craftsman power tools parts you need to get your equipment going again. We have the parts you need to make any type of Sears tool repair. Find the Craftsman power tool parts you need on our conventient parts list diagram for your model and get your equipment fixed fast.