Dishwasher Heating Element (replaces W10082892) WPW10082892

Pretty easy after removing the nuts.

I have a couple extra parts I need to return. Washer and nut.

Ease of Installation

Moderate

Duration of Installation

30 minutes - 1 hour

Yes, I would recommend this to a friend

Quick delivery and easy to I stall.

You will need a friend to tilt the dishwasher while you undo the bolts underneath and replace the heating element. It works great and is fairly simple but not a one person job.

Ease of Installation

Difficult

Duration of Installation

30 minutes - 1 hour

Yes, I would recommend this to a friend

works fine

install was challenging because entire dishwasher has to be removed but first water supply disconnected etc -- the heater connections are through rear of back of tub - -no access without removing tub and tipping on its side

Ease of Installation

Difficult

Duration of Installation

30 minutes - 1 hour

Yes, I would recommend this to a friend

Exact Fit

If you know what your doing it wasn't difficult. This part was an exact fit. Make sure you have enough wire to pull out the dishwasher

Ease of Installation

Moderate

Duration of Installation

30 minutes - 1 hour

Yes, I would recommend this to a friend

DIY easy-peasy!

After searching for a repair man, and finding out most don't work on dishwashers, and the ones who do want $100 just to show up. I knew what was wrong, it was obvious the heating element needed replacement. I found a YouTube video and decided to give it a try. It took me an hour. Easy-peasy!

Ease of Installation

Easy

Duration of Installation

30 minutes - 1 hour

Yes, I would recommend this to a friend

Elite dishwasher

part fit perfectly and dishwasher performing like new

Ease of Installation

Easy

Duration of Installation

30 minutes - 1 hour

Yes, I would recommend this to a friend

Important information missing from the instruction

dishwasher is still, after a week of work, not completing the cycle. We installed the heater fine with the instructions, but had to scour the internet to learn about the reset codes and had to try a long list of different codes to find the ones that worked for our machine. It now completes a cycle without dishes but when we tried a load of dishes last night it stopped at the same place in the cycle and began flashing the same 1 and 7 code. We'll try again today to get it working reliably. Overall we are unsatisfied.

Ease of Installation

Very Difficult

Duration of Installation

More than 2 hours

Heater element instsll

Not to difficult, need to pull out dishwasher, turn on back, remove plastic nuts holding element. Install new element, has new sealing washers. Only real issue you will really run into is the fault code imbedded needs to be cleared and unless you have saved tech paperwork that is usuallly in all Kenmore appliances you will have a problem thinking you did not perform repair properly. Ayer running diagnostic mode code will clear and you will be good to go.

Ease of Installation

Easy

Duration of Installation

30 minutes - 1 hour