CONFIRM THE PART FITS
Refrigerator Dispenser Ice Chute Door Hinge Lever 69675-7
Part #69675-7
Part Information
This dispenser ice chute door hinge lever (part number 69675-7) is for refrigerators.
Dispenser ice chute door hinge lever 69675-7 holds the ice chute door and allows the door to pivot.
Unplug the refrigerator and safely store any food that could deteriorate while the power is off before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $8.09 |Â11% OFFÂ Phone Price : $9.09
- $80.74 |Â7% OFFÂ Phone Price : $86.74
- $9.88 |Â9% OFFÂ Phone Price : $10.88
- $80.38 |Â7% OFFÂ Phone Price : $86.38
- $18.12 |Â10% OFFÂ Phone Price : $20.12
- $68.67 |Â8% OFFÂ Phone Price : $74.67
- $92.79 |Â6% OFFÂ Phone Price : $98.79
- $6.60 |Â13% OFFÂ Phone Price : $7.60
- $88.41 |Â6% OFFÂ Phone Price : $94.41
- $52.28 |Â10% OFFÂ Phone Price : $58.28
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #GS20B6C3EV Maytag side-by-side refrigerator | GS20B6C3EV | Ice & water dispenser |
Model #GS20C6C3EV Maytag refrigerator | GS20C6C3EV | Ice & water dispenser |
Model #RTW2200DAM Maytag refrigerator | RTW2200DAM | Ice & water dispenser |
Model #RTW2200DAE Maytag refrigerator | RTW2200DAE | Ice & water dispenser |
Model #GS22C6C3EV Maytag refrigerator | GS22C6C3EV | Ice & water dispenser |
Model #RSW2250AGE Maytag refrigerator | RSW2250AGE | Ice & water dispenser |
Model #GS24C6C3EA Maytag side-by-side refrigerator | GS24C6C3EA | Ice & water dispenser |
Model #GS24C7C3EV Maytag refrigerator | GS24C7C3EV | Ice & water dispenser |
Model #GS24B6C3EA Maytag refrigerator | GS24B6C3EA | Ice & water dispenser |
Model #RSBS22D010 Maytag refrigerator | RSBS22D010 | Ice & water dispenser |
Reviews
stock part
Easy to install. Doesn't last more than a few years so I keep one on hand. A design flaw, not a supplier problem!!
Jack, Hampton,VA.
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Delivered a day earlier than estimated.
2nd time to replace this part, so I already knew the steps required. Remove phillips screw holding the front cover in place. Then with screw taken out, slide the cover to one side. 4 screws (#15 torx) allow removal of the dispenser. Remove old unit. Door and pad have to be moved over (no access to the screw head, so the cover has to be peeled back). Put door and pad on new hinge lever. Connecting the two springs requires small hands or a helper. Tighten the solenoid's ram screw to the hinge lever, replace the dispenser and 4 screws and the cover and retaining screw. Done!
FridgeGuy, Ohio
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour