$42.09 |Â
12% OFFÂ Phone Price : $48.09
CONFIRM THE PART FITS
Frigidaire Washer Door Boot (replaces 7134616100) 134616100
Part #134616100
Online Only Price
$168.38 |Â
7% OFFÂ Phone Price : $180.38
In Stock
For ZIP codes near Edit
This part fits
Part Information
Basic Information
- Part Name: Washer Door Boot
- Manufacturer: Frigidaire
- Category: Washer Parts
- Primary Function: Forms a seal between the wash tub and the door to prevent leaks during operation.
Technical Specifications
- Material: High-quality flexible rubber to ensure a secure and durable seal.
Installation & Compatibility
- Installation Difficulty: Medium — It requires detaching the existing door boot and securing the new one in place. Careful attention to proper alignment is necessary for optimal performance.
- Tools Required: Screwdriver, Pliers, and Work Gloves
Additional Information
This Frigidaire Washer Door Boot (part number 134616100) is designed to replace the previous part number 7134616100. Ensuring a snug fit, this door boot efficiently seals the interface between the washer door and tub, minimizing the risk of leaks that can damage your appliance and surrounding areas.
- Before starting the installation, always unplug the washer to ensure safety.
- Carefully remove the existing boot before aligning and installing the new one.
- Wearing work gloves is recommended to protect your hands from sharp edges and ensure a secure grip.
Always follow the manufacturer's installation guidelines to maintain warranty coverage and ensure long-term operational efficiency.
Frequently Used Together
- $80.82 |Â7% OFFÂ Phone Price : $86.82
- $381.39 |Â$12.00 OFFÂ Phone Price : $393.39
- $45.52 |Â12% OFFÂ Phone Price : $51.52
- $333.62 |Â$12.00 OFFÂ Phone Price : $345.62
- $220.36 |Â5% OFFÂ Phone Price : $232.36
- $32.82 |Â15% OFFÂ Phone Price : $38.82
- $18.59 |Â10% OFFÂ Phone Price : $20.59
- $11.17
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #EWFLW65HSS0 Electrolux washer | EWFLW65HSS0 | Motor/tub |
| Model #EWFLW65HTS0 Electrolux washer | EWFLW65HTS0 | Motor/tub |
| Model #EWFLW65HIW0 Electrolux washer | EWFLW65HIW0 | Motor/tub |
| Model #EIFLW55IKG0 Electrolux washer | EIFLW55IKG0 | Motor/tub |
| Model #EWFLW65IRR0 Electrolux washer | EWFLW65IRR0 | Motor/tub |
| Model #EIFLW55HMB0 Electrolux washer | EIFLW55HMB0 | Motor/tub |
| Model #EIFLW55HIW0 Electrolux washer | EIFLW55HIW0 | Motor/tub |
| Model #EWFLW65IMB0 Electrolux washer | EWFLW65IMB0 | Motor/tub |
| Model #EIFLW55IRR0 Electrolux washer | EIFLW55IRR0 | Motor/tub |
| Model #EIFLW50LIW1 Electrolux washer | EIFLW50LIW1 | Motor/tub |
Reviews
Perfect fit
Found a video online giving detail of how to remove / replace. Following the video made it fairly easy and quick. Toatal time from start to finish was roughly 45min. The fit and finish of the boot was great. Upon start up no leaks. Minor rubbing / break in of interface between boot and rotating drum. After one cycle of "clean washer" wash machine was ready for use.
Jeremy, MN
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Washer boot
The boot went on pretty easy just take your time and align it properly. Its the first spring retainer you have to be careful with. Lots of tension there. The second spring was easy. Make sure you have a decent space away from the drum and when you spin the drum it spins with out rubbing on the boot.
Steve, Grass Valley, CA.
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Not easy to install.
The spring on my model was difficult to stretch. Took two people to stretch it over the groove. I made a tool with a piece of pvc pipe and two 2 inch 1/4 inch bolts. I put duct tape on the threads to protect the bellows gasket.
Poppie, Texas
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Worst Experience Ever!!
The boot was not as described. It was an OEM part. You are to be able to replace thru door. NOPE! Called repairman and 4 hours later, machine fully disassembled, $200 fee for service call It was on. NOTHING like Sears repair video!
Sears E F l, Georgia
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
Laundry door seal for front loader.
Great part. Fast service. Perfect to never leave the home and get the part I needed.
nggg, OK
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Installation
Nice to have a second person to help install the inner spring. Everything else was easy to install.
A R, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Review of Boot
Sears price was better and delivery was fast. The boot received was the correct part and it worked perfectly. Install time was lengthy! Requires #2 square screwdriver, 2 spring clamps, standard tools and watching youtube videos several times. Use dish soap along the boot to facilitate easier install along the machine face. Happy to see a clean boot in place when done!
AllenS, Undisclosed
1 person thought this review was helpful.
- Ease of Installation
- Difficult
- Duration of Installation
- More than 2 hours