$21.96 |
21% OFF Phone Price : $27.96
CONFIRM THE PART FITS
Dishwasher Hose Clamp (replaces W10169167) W10789434
Part #W10789434
Online Only Price
$8.02 |
11% OFF Phone Price : $9.02
In Stock
For ZIP codes near Edit
This part fits
Part Information
This hose clamp (part number W10789434) is for dishwashers.
Hose clamp W10789434 holds the end of the water hose in place to prevent the hose from leaking water.
Unplug the dishwasher and shut off the water supply before installing this part. Wear work gloves to protect your hands during this repair.
Frequently Used Together
- $57.69 |9% OFF Phone Price : $63.69
- $130.66 |8% OFF Phone Price : $142.66
- $52.11 |10% OFF Phone Price : $58.11
- $79.35 |7% OFF Phone Price : $85.35
- $129.82 |8% OFF Phone Price : $141.82
- $142.20 |8% OFF Phone Price : $154.20
- $52.07 |10% OFF Phone Price : $58.07
- $166.12 |7% OFF Phone Price : $178.12
- $21.89 |22% OFF Phone Price : $27.89
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #KDTM404EBL3 KitchenAid dishwasher | KDTM404EBL3 | |
| Model #KDTM404EWH3 KitchenAid dishwasher | KDTM404EWH3 | |
| Model #KDTM404ESS3 KitchenAid dishwasher | KDTM404ESS3 | |
| Model #KDTM404EBS3 KitchenAid dishwasher | KDTM404EBS3 | |
| Model #WDF341PAPT2 Whirlpool dishwasher | WDF341PAPT2 | Pump, washarm and motor parts |
| Model #WDF340PAMB0 Whirlpool dishwasher | WDF340PAMB0 | Pump, washarm and motor parts |
| Model #WDF340PAMT0 Whirlpool dishwasher | WDF340PAMT0 | Pump, washarm and motor parts |
| Model #WDF341PAPB2 Whirlpool dishwasher | WDF341PAPB2 | Pump, washarm and motor parts |
| Model #WDF331PAMS0 Whirlpool dishwasher | WDF331PAMS0 | Pump, washarm and motor parts |
| Model #WDF341PAPT0 Whirlpool dishwasher | WDF341PAPT0 | Pump, washarm and motor parts |
Reviews
Perfect fit
Had to purchase as there is no clamp that fits like this one. Tried to get replacement clamp elsewhere but impossible to match dimensions needed. Used on Kitchen Aid dishwasher. No leaks after install.
JV16, Putnam NY
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Clamp
It's a clamp, I am waiting for the part that I ordered!
Hamus1, Fredonia, my
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Use these Clamps, NOT the ones with the Circ Pump
The circulation pump comes with clamps that require a pinch tool which I don't have. AND if you watch the youtube videos, you have to remove more parts to provide clearance to use the pinch tool. This clamp replaces the one that comes with the circulation pump and allow you to tighten with a straight edge screw driver.
Undisclosed, Spokane, WA
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
Hose clamp for maytag dishwasher
Fit maytag dishwasher hose perfectly. Replaced onetime factory pinch hose. Doesnt look like picture, is standard 1/4 inch wide hose clamp, just like the 1/2 inch clamps from any hardware store.
Undisclosed, Charlottesville, va
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Not shipped the pictured clamp. Image is deceiving
Clamp was just a reg hose clamp not the clamp from the picture. Over priced for a clamp i can get at the autoparts store for much less
Undisclosed, Mass
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
to reattach pump outlet hose
This hose clamp is only necessary because a one time use clamp is put on the pump outlet hose at the factory.
dog l, sequin
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Clamp Review
Hose clamps worked as expected with no issues. Thanks
K. W, Fallston, MD
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
The right clamp
Dishwasher hose requires this very size clamp. Those at the big box store are too wide.
Andyrom, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour