Agitator cam repair kit 285810 is an original equipment manufacturer (OEM) part that fits some Kenmore top-load washers in these series: 110.20, 110.21, 110.22, 110.23, 110.26, 110.27, 110.28, 110.29 and 110.92.
Agitator cam repair kit 285810 replaces the cam and agitator dogs that rotate the upper half of the agitator assembly.
This kit includes 4 agitator dogs, agitator cam, plastic retainer bearing, plastic retainer nut and spring.
Replaces original top-load washer agitator cam repair kit part numbers 3363184 and 3947113.
I used a 1/2" drive extension to remove/replace the plastic threaded part in the center. Gentle hand tighten. Took 5 minutes.
Ease of InstallationVery Easy
Duration of InstallationLess than 30 minutes
verified customer
Yes, I would recommend this to a friend
Was this review helpful?
Perfect fit!
November 03, 2021|JodyMXH, Vermont
Fast shipping, easy install. Tools needed: 1/2" drive rachet with minimum 6" extension, flat tip screw driver. 15 minute fix
Ease of InstallationVery Easy
Duration of InstallationLess than 30 minutes
verified customer
Yes, I would recommend this to a friend
Was this review helpful?
Simple replacement
September 08, 2021|Glenn, Roseville Minnesota
As long as you have a 1/2 inch socket extension, the job is simple. Makes a world of difference.
Ease of InstallationVery Easy
Duration of InstallationLess than 30 minutes
verified customer
Yes, I would recommend this to a friend
Was this review helpful?
Easy to install
December 24, 2020|Dlk19, Chesapeake, VA
Found the right part quickly and received it in a good amount of time. Found a video that showed how to replace the part and had the job done in minutes
Ease of InstallationVery Difficult
Duration of InstallationLess than 30 minutes
verified customer
Was this review helpful?
Did the Trick
October 19, 2020|blackcat59, Augusta, Maine
The kit was an exact match to the original parts and was a very easy installation. Took me 5 minutes to replace the worn out parts
Ease of InstallationVery Easy
Duration of InstallationLess than 30 minutes
verified customer
Yes, I would recommend this to a friend
Was this review helpful?
Easy
September 06, 2020|Undisclosed, Florida
Perfect fit & easy to replace. Took about 5 minutes.
Ease of InstallationVery Easy
Duration of InstallationLess than 30 minutes
verified customer
Was this review helpful?
Perfect
June 21, 2020|Paul T F, Midwest
Easy, fits well, just like it should. Seems factory
Ease of InstallationVery Easy
Duration of InstallationLess than 30 minutes
verified customer
Yes, I would recommend this to a friend
Was this review helpful?
Washer Agitator Cam Repair Kit
May 10, 2020|40Horse, GrantValkaria, Fl
The parts arrived ahead of time. They were the correct parts. Made the job a lot easier!
verified customer