CONFIRM THE PART FITS
Refrigerator Freezer Door Gasket (replaces 12550116Q) WP12550116Q
Part #WP12550116Q
Part Information
Special details: Smooth folds and creases in gasket WP12550116Q by soaking it in warm water or warming it with a hair dryer on low heat.
This freezer door gasket (part number WP12550116Q) is for refrigerators.
Freezer door gasket WP12550116Q creates a seal around the door to prevent warm air from entering the freezer compartment.
Safely store any food that could deteriorate while the door is open for this repair.
Frequently Used Together
- $145.13 |Â8% OFFÂ Phone Price : $157.13
- $108.92 |Â10% OFFÂ Phone Price : $120.92
- $338.61 |Â$12.00 OFFÂ Phone Price : $350.61
- $18.95 |Â10% OFFÂ Phone Price : $20.95
- $475.80 |Â$12.00 OFFÂ Phone Price : $487.80
- $16.74 |Â11% OFFÂ Phone Price : $18.74
- $20.89 |Â22% OFFÂ Phone Price : $26.89
- $73.14 |Â8% OFFÂ Phone Price : $79.14
- $56.14 |Â10% OFFÂ Phone Price : $62.14
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #ARB210BAW-PARB210BAW0 Amana bottom-mount refrigerator | ARB210BAW-PARB210BAW0 | Door assemblies |
Model #ARB210BAC-PARB210BAC0 Amana bottom-mount refrigerator | ARB210BAC-PARB210BAC0 | Door assemblies |
Model #ARB2117AW-PARB2117AW0 Amana bottom-mount refrigerator | ARB2117AW-PARB2117AW0 | Door assy |
Model #ARB2107AW-PARB2107AW3 Amana bottom-mount refrigerator | ARB2107AW-PARB2107AW3 | Door assy |
Model #ARB2109ACR-PARB2109AC3 Amana bottom-mount refrigerator | ARB2109ACR-PARB2109AC3 | Door assy |
Model #ARB2117AC-PARB2117AC1 Amana bottom-mount refrigerator | ARB2117AC-PARB2117AC1 | Door assy |
Model #ARB2109AWR-PARB2109AW0 Amana bottom-mount refrigerator | ARB2109AWR-PARB2109AW0 | Door assy |
Model #ARB2109AWR-PARB2109AW2 Amana bottom-mount refrigerator | ARB2109AWR-PARB2109AW2 | Door assy |
Model #ARB2117AW-PARB2117AW1 Amana bottom-mount refrigerator | ARB2117AW-PARB2117AW1 | Door assy |
Model #ARB2107AC-PARB2107AC3 Amana bottom-mount refrigerator | ARB2107AC-PARB2107AC3 | Door assy |
Reviews
Prompt delivery.
The replacement gasket arrived very quickly. And fits the unit properly.
Dean, Yreka Ca
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Good service, good price, easy to find
I was looking for an obscure replacement part for my freezer. Sears made it easy to find and affordable.
Tommy, Attleboro, MA
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy with a little patients.
Perfect fit, I removed the drawer by the release tabs on the rear of the drawer slides, laid it face down on towels pulled back the old strip and loosen all the 1/4 inch screws, do not remove them completely. Remove old strip clean the door and install the new strip do not use power driver to tighten screws.
Eddydotd, Melbourne Florida
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Wrong part again (for the third time)
Did not install. Returned part which was the third incorrect part that I received from you.
nuts, Winder,Ga
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
Poor
The product had a poor magnet in it would not even seal very dissatisfy with it. Plus all the time spent installing it and then taking it back out and putting the old one back on.
Chris 2, Silver Lake NH
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Fit perfectly
This part fit perfectly on my 15-year-old refrigerator/freezer. Perfectly replaced the old gasket that was deteriorating.
Jim G, Los Angeles, CA
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Exact fit.
Remove gasket. Loosen all screws 3 full turns. Useing a flathead screw driver gently slide the blade into to gap and slide it around the 4 sides to clean any old glue out. Then just work the gasket into the crack. If you still have trouble you can use a paint can opener from the inside to create the gap needed to work the tab into place. Then snug the screws back down.
Goose, Virginia
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Gasket installation
Watched video on installation, installation did not go as shown. I found out that totally removing the inside panel (~25 screws) made install more smooth. Took me about 2 hours, would have gone faster if I had help. Have refrigerator/freezer empty and unplugged, then you can take your time. Let new gasket lay flat for a day or two. Working great.
Paul, Manitowoc, WI
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend