CONFIRM THE PART FITS
Part Information
This push-to-start switch (part number WP3395382) is for dryers.
Push-to-start switch WP3395382 starts the dryer when you press and release the button.
Disconnect the power before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $93.81 |Â6% OFFÂ Phone Price : $99.81
- $120.70 |Â9% OFFÂ Phone Price : $132.70
- $26.63 |Â18% OFFÂ Phone Price : $32.63
- $15.98 |Â11% OFFÂ Phone Price : $17.98
- $12.56 |Â14% OFFÂ Phone Price : $14.56
- $37.01 |Â14% OFFÂ Phone Price : $43.01
- $158.29 |Â7% OFFÂ Phone Price : $170.29
- $45.98 |Â12% OFFÂ Phone Price : $51.98
- $51.10 |Â11% OFFÂ Phone Price : $57.10
- $14.74 |Â12% OFFÂ Phone Price : $16.74
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #11069912990 Kenmore dryer | 11069912990 | Top and console |
Model #11068702894 Kenmore dryer | 11068702894 | Top and console |
Model #11077902792 Kenmore dryer | 11077902792 | Top and console |
Model #11078712894 Kenmore dryer | 11078712894 | Top and console |
Model #11068972890 Kenmore dryer | 11068972890 | Top and console |
Model #11066852690 Kenmore dryer | 11066852690 | Top and console |
Model #11078932791 Kenmore dryer | 11078932791 | Top and console |
Model #11068944891 Kenmore dryer | 11068944891 | Top and console |
Model #11077902790 Kenmore dryer | 11077902790 | Top and console |
Model #11088754792 Kenmore laundry center | 11088754792 | Washer/dryer control panel |
Reviews
Right part
I was not sure what cause my problem, so I started with replacing the timer. When it did not help, I tried that switch. And it worked!!! I got this part in 3 days and it took 5 min for me to install it. Saved us at least $600. My wife is so happy. Thank you Sears!
Vlad, Indianapolis
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Don't ask for advice
Dryer would only run while I held the start button down. Parts guy said buy start button. I did, same problem. Virtual tech guy walked me through volt meter checks and said buy motor relay switch. I did, had to modify new part to fit, same problem. I spent about $100 on parts and shipping and $40 on virtual tech. I called local tech with 45 years of experience, he said probably main board. They don't make it anymore. I am out $140, and will have to buy a new dryer. Wish I had hired the experienced local tech to start with.
DIY g, Illinois
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy Installation
This is done without taking the back off the dryer. It's an easy repair!
Todd, Oregon
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Exact part that need
Installed in less than a minute, was thecorrect part, was easy to find on the website
MJModd, Mount Joy, PA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
exact replacement, super easy to replace
it took me all of 10 minutes to replace. probably saved me a couple of hundred dollars by doing it myself
russgolf98, selinsgrove,pa.
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Easy install/fix.
I Youtubed the possible causes and began with the starter switch. The switch twists out, then unattach the wires one at a time while attaching one to the new switch (while still on the old one) to be sure they are in the proper places. It did get the dryer to run but after further diagnosis, realize I need support pulleys. I ordered the maintenance repair kit (pulleys, tension pulley & belt). Better than expected. Sears always exceeds my expectations.
AJBayan, NJ
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Easy install
Easy install. Took 5 minutes. Fit perfectly. Would definitely order again.
Big P, Northern Virginia
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
kenmore dryer start switch remove and replace
Easy to remove and replace after seeing youtube video. Turns out, the old switch was good. Did not need to be replaced.
Undisclosed, St. Petersburg, FL
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend