Washer Drain Pump 5859EA1004E

It fixed my problem.

It fixed my problem and fairly easy to install. The last pump was installed by a so called professional he put way to much sealer which caused the pump to fail after a few years. Plus it cost twice as much you don't need sealer if you clamp it right.

Ease of Installation

Easy

Duration of Installation

1 - 2 hours

It works great!

The pump arrived a day late due to shipping delays, but it was quick to install and is working great.

Ease of Installation

Moderate

Duration of Installation

30 minutes - 1 hour

Yes, I would recommend this to a friend

Exact part needed and was easy to install

The repair was easy. Although new wiring came with the drain pump, I did not use it. The existing wiring was fine. The only issue that I had was a small leak that originated from the small hose running from the drain pump to the drain hose. When removing the small hose from the old pump, it seems I heard and felt that there might have been an adhesive on it. If so, that explains why it leaked when I reconnected it (the adhesive seal was broken). The fix was simple. I purchased some Loctite Clear Silicone (waterproof sealant) from Home Depot, and put a small amount on the inside of the small hose (used the tip of my finger to spread it around evenly), and then reconnected it to the new pump (it sets in about 45 minutes). My washer is now fixed (i.e. it drains and spins) and has no leaks!

Ease of Installation

Very Easy

Duration of Installation

30 minutes - 1 hour

Yes, I would recommend this to a friend

The Tight Part for Kenmore Washer.

The right part. Fit was perfect. Plugs were correct.

Ease of Installation

Easy

Duration of Installation

30 minutes - 1 hour

I replaced my washing machine drain pump.

Pump works great and washing machine runs like new.

Ease of Installation

Very Easy

Duration of Installation

30 minutes - 1 hour

Yes, I would recommend this to a friend

Pump replacement

It took a few minutes to put in, but was relatively easy. The part was new, but the casing was cracked.

Ease of Installation

Easy

Duration of Installation

30 minutes - 1 hour

Easy to install.

Installing the parts is a snap. The hardest thing to do is removing the old parts. If you're gonna use the same host; you have to be careful not to damage the old host. Otherwise it's very easy to replace.

Ease of Installation

Very Easy

Duration of Installation

Less than 30 minutes

Kenmore Elite Washer Pump Motor

Thanks to Sears for including the wiring harness for the washer water pump. The harness was the problem (one lead no continuity) and old pump was still okay (2010 vintage machine). I installed the new pump and harness and should be good for another few years. I did not install the hoses that I ordered and the old ones seemed to seal against leakage (only 5 washing batches so far) using clear silicone rubber.

Ease of Installation

Very Easy

Duration of Installation

30 minutes - 1 hour