This water reservoir (part number MJM61904702) is for refrigerators.
Water reservoir MJM61904702 holds the water for the water dispenser as the water chills.
Safely store any food that could deteriorate while the power is off. Unplug the refrigerator and shut off the water supply before installing this part. Wear work gloves to protect your hands.
Could install the part in less than half the time since doing it once. Just took a bit of time to read the instructions.. Am concerned that this part may not be as durable as I would like since it failed when the refrigerator was only about 4 years old.
Ease of InstallationVery Easy
Duration of Installation30 minutes - 1 hour
verified customer
1 person thought this review was helpful.
Reservoir tank
September 08, 2020|Undisclosed, Missouri
Length may have to be adjusted and the mounting tabs don't line up completely , you will have to adjust them if possible. I couldn't get both to line up .
Ease of InstallationModerate
Duration of Installation30 minutes - 1 hour
verified customer
Yes, I would recommend this to a friend
Was this review helpful?
Splice it in
September 11, 2018|Lambere, Delmar, N.Y.
Buy 2 shark bite connectors and splice it where it's convenient. Don't try to remove old tubing from original connection points. I broke one fitting at solenoid doing this. Shark bites are simple and leak proof. You could do this in 10 mins.
Ease of InstallationVery Easy
Duration of Installation30 minutes - 1 hour
verified customer
3 people thought this review was helpful.
Easy after getting old tube out
July 28, 2018|Steve539, Mt. Horeb, WI
would have been quicker if included instructions to remove tank & tubes & discarding.
Ease of InstallationModerate
Duration of Installation30 minutes - 1 hour
verified customer
Was this review helpful?
Instructions would be nice
April 28, 2018|albany o, Albany, OR
It installed real easy except when it came to connecting to water inlet. Now I have to spend another 80 to get the entire part water inlet when it should have gone right in. Should be instructions, but I guess they cant stand DIY's.
Ease of InstallationEasy
Duration of Installation1 - 2 hours
verified customer
Was this review helpful?
Felt liked the agent worked on commission
January 10, 2020|Jeffrey S, Ithaca NY
They sent completely the wrong part. I have a copy of the chat transcript. It was absolutely clear that I needed a plastic tank, not this hose. The agent sent photos and links to photos during the chat. Still they sent the part I said was absolutely not right.
Ease of InstallationVery Difficult
Duration of InstallationLess than 30 minutes
verified customer
Yes, I would recommend this to a friend
Was this review helpful?
This is the wrong part for our refrigerator
August 22, 2019|LAS1********************, Reston, VA
It does not appear to be compatible all - it is a hose and it needs to replace a 'tank'. Our model number is Kenmore Elite 79575546400. Photo added of the part it needs to replace - 615A
verified customer