CONFIRM THE PART FITS
Line Trimmer Clutch Drum (replaces 530028799) 530150247
Part #530150247
Part Information
This clutch drum (part number 530150247) is for line trimmers.
Clutch drum 530150247 engages with the clutch to spin the flex shaft and cutting head.
Disconnect the spark plug wire before installing this part. Wear work gloves to protect your hands.
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #358791061 Craftsman gas line trimmer | 358791061 | Cylinder/crankshaft/crankcase |
| Model #358795101 Craftsman gas line trimmer | 358795101 | Crankcase/crankshaft |
| Model #358791060 Craftsman gas line trimmer | 358791060 | Cylinder/crankshaft/crankcase |
| Model #PPB150E TYPE 2 Poulan gas line trimmer | PPB150E TYPE 2 | Cylinder/crankshaft/crankcase |
| Model #S31BC Poulan gas line trimmer | S31BC | Cylinder/crankshaft/crankcase |
| Model #PPB300 Poulan gas line trimmer | PPB300 | Engine assembly |
| Model #S31BC (RECON) Poulan gas line trimmer | S31BC (RECON) | Crankshaft/cylinder/crankcase |
| Model #PP136E TYPE 1 Poulan gas line trimmer | PP136E TYPE 1 | Cylinder/muffler/crankshaft |
| Model #SM132LE TYPE 2 Poulan gas line trimmer | SM132LE TYPE 2 | Cylinder/crankshaft/crankcase |
| Model #PPB32SST TYPE 1 Poulan gas line trimmer | PPB32SST TYPE 1 | Cylinder/crankshaft/muffler |
Reviews
Proper replacement
This screw on this part somehow loosened and I think this caused the clutch escape the drum. I had to order a new one because the edge of the old drum had become chipped and jagged. It's an easy repair. Wear gloves during repair and replacement. It's very difficult to determine the screw head type, but I think it's a star drive though. That's the only negative I have for this part is the screw for the drive shaft.
Shave, Evans, GA
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Extremely Slow To Ship
I called to make sure this part was in stock. I was told it was. I placed my order and checked the status the next day,. It indicated my order would be shipped in 2 to 3 days. After two weeks of waiting, I again checked the status and saw my part had been back ordered. I spoke with someone who promised to facilitate shipping, however, it was several days later and another phone call before any action was taken. When it was shipped, UPS got it here in 2 days. In the future, I will only use Sears Parts as a last resort!!
Undisclosed, Washington State
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Clutch Install
Parts were easy to install and not a big deal at all.
Lee 5, MIdland Tex
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
clutch housing replace.
Clutch housing and screw,a small diameter torch's bit driver is key to this installation,do not over torch the screw...
Ssniper1965, West Virginia
1 person thought this review was helpful.
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Piece of cake
Easy to install needed no time at all easy Peasy weed wacker pleasy
Bunky, Mpls
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour