CONFIRM THE PART FITS

Fan Blade 1-80250-102

Part #1-80250-102

Replaced by #WPW10445742
?
Manufacturer substitution
This part replaces 1-80250-102. Substitute parts can look different from the original.
Online Only Price
$10.05
17% OFF Phone Price : $12.05
In Stock
For ZIP codes near Edit
This item is not returnable

Part Information

This evaporator fan blade (part number WPW10445742) is for freezers.

Evaporator fan blade WPW10445742 blows air over the evaporator to cool the refrigerant.

Safely store any food that could deteriorate while the power is off and unplug the freezer before installing this part. Wear work gloves to protect your hands.

Reviews

Perfect
May 10, 2021

Very easy to install plus solved issue of riding/sliding too far during operation and rubbing the motor with end stop cap lacking on original freezer assembly. Some may confuse problem as evaporator sensor issue as I did at first. Fan simply hit motor cage bolts stopping all functions. Ice build up gradually began then full stop. Bottom and mid drawers plus lower shelf removed. Few evaporator/fan protection panel phillips screws and two motor frame 5/16s bolt screws freezer like new again. Food did not have time to thaw at all.

Drew, Dayton

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Fan for Maytag Freezer MQF1656TEW00
June 08, 2020

It is just the fan blade. lt has the little stopper clip on tip to stop the fan from sliding into the bolts holding the fan motor.

ReneeK, Fort Collins CO

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Replaced evaporator fan.
April 13, 2020

Fit my refrigerator perfectly. Old fan was sliding down the motor shaft and becoming jammed against the motor mount screws. New fan has an additional clip to prevent the fan from moving.

Dale E, Perkasie, PA

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

easy to install
September 18, 2019

just slipped the fan on the motor shaft and put back the cover.

jesse j, lucerne

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
30 minutes - 1 hour