CONFIRM THE PART FITS

Freezer Evaporator Fan Motor (replaces 3-60336-001) WP3-60336-001

Part #WP3-60336-001

Online Only Price
$164.44
7% OFF Phone Price : $176.44
In Stock
For ZIP codes near Edit
60-day return policy

Part Information

This evaporator fan motor (part number WP3-60336-001) is for freezers.

Evaporator fan motor WP3-60336-001 circulates air through the freezer for efficient cooling.

Safely store any food that could deteriorate while the power is off and unplug the freezer before installing this part. Wear work gloves to protect your hands.

Top models using the same part

Model NameModel NumberDiagram Name
Model #WCF17ER Crosley upright freezerWCF17ER
Compressor assy
Model #F2017RW3 WC Wood upright freezerF2017RW3
Compressor assy
Model #F20WCE WC Wood upright freezerF20WCE
Compressor assy
Model #F17BCRE WC Wood upright freezerF17BCRE
Compressor assy
Model #F17SCLE WC Wood upright freezerF17SCLE
Compressor assy
Model #RFC17WBE04 WC Wood upright freezerRFC17WBE04
Refrigerator unit compartment system
Model #RFC17WBE WC Wood upright freezerRFC17WBE
Refrigerator unit compartment system
Model #F17WCE WC Wood upright freezerF17WCE
Compressor assy
Model #WCF15E Crosley upright freezerWCF15E
Compressor assy
Model #WCF20E Crosley upright freezerWCF20E
Compressor assy

Reviews

Fast delivery, but had to cut the shaft to fit.
May 19, 2018

Correct part but a newer level and I had to cut about 3/8" off the shaft to fit in the freezer, if not the press on blades would hit the back wall. Fairly easy to do but had to un install, cut, re install. Mounting was the same and it has worked for several weeks now so it is fixed.

Model T S, Zionzville IN

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
1 - 2 hours
Quick and easy replacement part
February 22, 2018

The replacement motor took less than an hour to complete and I did have to make a simple modification. The new motor wiring harness connector would have worked but it unfortunately didn't have a easy way to remove the third wire from the connector that goes to the defrost heater coil. I just simple used the old connector and soldered the new fan motor wiring to it. If it were not for that it probably would have only taken about 15 minutes to complete repair. Needless to say the part fits and is working and doing the job it was designed for.

Paw-Paw, Hampton, Virginia

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour