$353.41 |Â
$12.00 OFFÂ Phone Price : $365.41
CONFIRM THE PART FITS
Snowblower Impeller (replaces 684-04057B-0637, 684-04057C, 684-04057C-0638, 684-04057C-0662, 684-04057C-0691, 684-04057C-0723, 684-04057C-4033, 684-04057C-4041, 684-04057C-4044) 684-04057C-0637
Part #684-04057C-0637
Online Only Price
$83.61 |Â
7% OFFÂ Phone Price : $89.61
In Stock
For ZIP codes near Edit
Part Information
This impeller (part number 684-04057C-0637) is for snowblowers.
Impeller 684-04057C-0637 rotates to blow snow up and out the chute.
Disconnect the spark plug wire before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $3.00 |Â25% OFFÂ Phone Price : $4.00
- $3.14 |Â24% OFFÂ Phone Price : $4.14
- $4.40 |Â19% OFFÂ Phone Price : $5.40
- $5.42 |Â16% OFFÂ Phone Price : $6.42
- $41.50 |Â13% OFFÂ Phone Price : $47.50
- $22.79 |Â21% OFFÂ Phone Price : $28.79
- $32.27 |Â16% OFFÂ Phone Price : $38.27
- $75.84 |Â7% OFFÂ Phone Price : $81.84
- $59.09 |Â9% OFFÂ Phone Price : $65.09
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #31AH55TH799 MTD gas snowblower | 31AH55TH799 | Auger & housing |
| Model #31AE6GQ3711 Troybilt gas snowblower | 31AE6GQ3711 | Impeller/chute/auger |
| Model #9528 Troybilt gas snowblower | 9528 | Impeller/chute/auger |
| Model #31AE6GO3711 Troybilt gas snowblower | 31AE6GO3711 | Auger housing/gearbox assembly |
| Model #31AS6BN2711 Troybilt gas snowblower | 31AS6BN2711 | Auger housing/chute |
| Model #5524 Troybilt gas snowblower | 5524 | Auger housing/chute |
| Model #31AE6LHG705 MTD gas snowblower | 31AE6LHG705 | Auger & housing |
| Model #31AE6GKH730 MTD gas snowblower | 31AE6GKH730 | Auger & housing |
| Model #31AE6FHE706 MTD gas snowblower | 31AE6FHE706 | Auger & housing |
| Model #31AE6BHE723 MTD gas snowblower | 31AE6BHE723 | Auger & housing |
Reviews
Snowblower impeller for 247.888300
2-4 hours to install. Check uTube for installation video. Had to grind down the impeller shaft for the impeller to slide on the shaft.
TEB80420, Alma CO
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- More than 2 hours
Easy to install
Wasn't to heard to install. Just a reverse assembly of taking it apart.
Jerry9492, California
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Doable
Luckily I was able to find a video on YouTube with a guy doing this repair; otherwise I'm not sure I would have tackled it, as you literally have to take the blower in half to get to it. That being said, with the video help, it went relatively smoothly, and took a little over an hour-ish. Make sure to pay attention to where the belt and clips run when you disassemble for easier reassembling.
Das l, Sheldon, IA
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours