$40.92 |Â
13% OFFÂ Phone Price : $46.92
CONFIRM THE PART FITS
Dryer Drum Support Roller Shaft W10359270
Part #W10359270
Replaced by #WPW10359270
?
Manufacturer substitution
This part replaces W10359270. Substitute parts can look different from the original.
Online Only Price
$34.45 |Â
15% OFFÂ Phone Price : $40.45
In Stock
For ZIP codes near Edit
This part fits
Part Information
This drum support roller shaft (part number WPW10359270) is for dryers.
Drum support roller shaft WPW10359270 holds the drum roller in place on the bulkhead and provides a smooth surface for the roller to spin on.
Unplug the dryer before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $14.74 |Â12% OFFÂ Phone Price : $16.74
- $15.98 |Â11% OFFÂ Phone Price : $17.98
- $12.56 |Â14% OFFÂ Phone Price : $14.56
- $4.23 |Â19% OFFÂ Phone Price : $5.23
- $6.53 |Â13% OFFÂ Phone Price : $7.53
- $4.39 |Â19% OFFÂ Phone Price : $5.39
- $4.39 |Â19% OFFÂ Phone Price : $5.39
- $175.49 |Â6% OFFÂ Phone Price : $187.49
- $93.81 |Â6% OFFÂ Phone Price : $99.81
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #1106858701 Kenmore dryer | 1106858701 | Bulkhead assembly |
| Model #1107058720 Kenmore dryer | 1107058720 | Bulkhead assembly |
| Model #1107058700 Kenmore dryer | 1107058700 | Bulkhead assembly |
| Model #1106958701 Kenmore dryer | 1106958701 | Bulkhead assembly |
| Model #1106858703 Kenmore dryer | 1106858703 | Bulkhead assembly |
| Model #11076460600 Kenmore dryer | 11076460600 | Bulkhead asm |
| Model #11076460230 Kenmore dryer | 11076460230 | Bulkhead assembly |
| Model #11078490200 Kenmore dryer | 11078490200 | Bulkhead assembly |
| Model #11076476400 Kenmore dryer | 11076476400 | Bulkhead assembly |
| Model #11076461110 Kenmore dryer | 11076461110 | Bulkhead assembly |
Reviews
Replacing Dryer Roller shaft
It was easy to install. Took me about 45 including clean up. Watch a You Installation video. There are plenty out there. Sears Parts direct is the best route if you want OEM Parts at the best price. Delivery is fast also. I wouldn't go anywhere else.
Steve, Danbury Ct
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
drum roller supports
part took so long to arrive [over a month or so]. I purchased part from amzon.
bill, ny
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Not good
Shaft had a rough edge on it and when I put the roller on it scratch the inside of the roller causing it to not turn smoothly. Did my best with it and put it back together because I didn't need to have the dryer down for another week or 2. Has made noise since and now a few weeks later I'm going to have to order another roller and shaft and do the job again.
Derek, Southaven, Ms
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Drum Support Shaft
There are 2 support shaft in my dryer I Had to replace the lower one because it was worn out after 20 years of use. It was making a squealing noise I knew I had to replace the roller bearing but when I installed the new roller bearing it was too lose. Removing the lower support shaft was easy locate the nut that is behind the dryer and loosen. For more details go online and look for videos.
vks5, NY, NY
1 person thought this review was helpful.
- Ease of Installation
- Easy
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Roller and shaft install
Easy to install and fixed the problem replaced shaft and rollers in dryer
Johno, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Perfect part
This repair takes the dryer down to its basic parts. Once it's opended up changing the part is very straight forward . Best to wear good work gloves if you don't want any cuts. The inside of the dryer has many sharp edges.
Wiley, Folsom, California
2 people thought this review was helpful.
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
First time I fixed a dryer!!
I am a 60 year old woman who loves to learn how to do things for myself between ordering manufacturers parts and you tube videos I DID IT!! It wasn't hard at all. I replaced both shafts, the wheels and the door switch. My husband was blown away that I took care of it without him or a repairman. My ratings are from a novice so if you have any experience you are miles ahead of me.
Deborah D, Henderson NV
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Easy to install with two people.
It's easier with two people. You can do it alone with a vise grip to hold the shaft from turning while tightening the nut on the back side.
LarryRC, Northern Minnesota
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes