$338.31
CONFIRM THE PART FITS
Room Air Conditioner Condenser Fan Blade 309651003
Part #309651003
Part Information
This condenser fan blade (part number 309651003) is for room air conditioners.
Condenser fan blade 309651003 fits on the motor shaft and circulates air over the condenser to cool the refrigerant before the refrigerant enters the evaporator.
Unplug the room air conditioner before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #25370094000 Kenmore room air conditioner | 25370094000 | |
| Model #GAL123K1A3 Gibson room air conditioner | GAL123K1A3 | |
| Model #GAL123K1A2 Gibson room air conditioner | GAL123K1A2 | |
| Model #AR09ME5L2 Frigidaire room air conditioner | AR09ME5L2 | |
| Model #WAL100K1A1 White-Westinghouse room air conditioner | WAL100K1A1 | |
| Model #MH309G1QB Kelvinator home | MH309G1QB | |
| Model #AM12C5EWA Gibson room air conditioner | AM12C5EWA | |
| Model #AM09C5EWB Gibson room air conditioner | AM09C5EWB | |
| Model #AL125M1A1 White-Westinghouse room air conditioner | AL125M1A1 | |
| Model #MH312G1QA Kelvinator room air conditioner | MH312G1QA |
Reviews
Installation is going to be a challenge.
Since the fan goes between the fan sroud and the condenser coil, removal of the coilis not possible and the fan shroud is screwed in from behind the evaperator coil which is not removable. The only way to install the new fan is to cut thr shroud in half. Removing the top half will allow access to the front of the fan shaft and drop in the new fan, tighten the shaft clamp. Then replace the top half of the shroud re-attach the 4 screws then tape the horizontal cut on bothe sides with Gorrilla tape and hope for the best.
Born e, Chardon,Ohio
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
had to take the ac apart totally
my son did it and it took about an hour because you had to diassemble the ac so I gave it a good cleaning
owllady 1, swannanoa nc
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
fit as suppose to
wish it would last longer. second one i have installed.
bsherk, minnnesota
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour