CONFIRM THE PART FITS
Part Information
This clutch assembly (part number 753-05860) is for lawn and garden equipment.
Clutch assembly 753-05860 engages and disengages the drive shaft. The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included.
Work in a well-ventilated area when installing this part. Drain the fuel tank and disconnect the spark plug wire before beginning the repair. Wear work gloves to protect your hands.
Frequently Used Together
- $4.54
- $19.56 |Â9% OFFÂ Phone Price : $21.56
- $21.16 |Â22% OFFÂ Phone Price : $27.16
- $74.45 |Â7% OFFÂ Phone Price : $80.45
- $64.52 |Â10% OFFÂ Was : $71.69
- $14.98 |Â12% OFFÂ Phone Price : $16.98
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #CMXGJAMD25PS Craftsman gas line trimmer | CMXGJAMD25PS | Engine assembly |
Model #41AD25PS793 MTD gas line trimmer | 41AD25PS793 | Engine assembly |
Model #316794470 Craftsman gas line trimmer | 316794470 | Fuel tank/starter/muffler |
Model #41CDZ12G799 MTD gas line trimmer | 41CDZ12G799 | Fuel tank/starter/muffler |
Model #41AD25SC793 MTD gas line trimmer | 41AD25SC793 | Engine assembly |
Model #41CD25SC793 MTD gas line trimmer | 41CD25SC793 | Engine assembly |
Model #CMXGTAMD25SC Craftsman gas line trimmer | CMXGTAMD25SC | Engine assembly |
Model #41DD25SC793 MTD gas line trimmer | 41DD25SC793 | Engine assembly |
Model #CMXGTAMD25CC Craftsman gas line trimmer | CMXGTAMD25CC | Engine assembly |
Model #41AD25CC793 MTD gas line trimmer | 41AD25CC793 | Engine assembly |
Reviews
Weed Eater Clutch
The springs on my Craftsman weed-eater clutch were damaged, so the needed replacing. I received OEM parts that fit perfectly.
DIYer, Stockbridge, GA
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Outstanding!
All parts were identical to original ones and all shipped together. Needed T20 Torx to disassemble/assemble
Jarhead035, 48738
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- Less than 30 minutes
Clutch Chang out on Weedwacker
Easy to install but took a lot of disassemble of covers to get to it about 1 hour or s0
OWENS 1, Shawnee, Kansas
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Easy to install
Very easy to install it took me 20 min to install working good I am happy
Willyert, Jackson Nj
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- Less than 30 minutes
Great fit
First off when I ordered my needed parts to repair the Weed Wacker it told me to expect the parts by 6/27/19 (I ordered on 6/16/19) I got one order 6/18/19 and the other 6/21/19 which blew my mind because I was not expecting to get so early so I was able the repair over the weekend. All parts fit perfectly and easy to install the cost was reasonable and it works like it should. Great experience.
Tazmo, Austin Texas
1 person thought this review was helpful.
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Piece of cake
Clutch blew apart and tore up the flywheel Repairs were pretty straight forward and easy.
BoycesBill, Richmond, MI
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Easy to repair
The best thing to do is take the spark plug out. Pull the piston down to the bottom of its stroke. Stuff a 5/16 rope down the spark plug hole to fill up the cylinder. This will help hold the crank shaft from turning with out damaging the piston while you break the clutch part lose and unscrew it off the crank shaft(left hand thread). After that screw on the new clutch, pull the rope out, put the spark plug back in and put the housing back together. Prime it up, crank it up. 30 minutes tops. Like my Social Security Check, not much to it.
Reggie 1, Tylertown, Ms
1 person thought this review was helpful.
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Relatively simple to do
There were no instructions included, so had to view a u tube to learn how to unscrew the broken clutch off of the shaft, as it was locked on the shaft. After learning the rope trip, it was rather simple to accomplish.
Wasko, Danbury, Ct
1 person thought this review was helpful.
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour