$40.58 |
13% OFF Phone Price : $46.58
CONFIRM THE PART FITS
Part Information
This auger drive belt (part number 49392) is for lawn tractor snowblower attachments.
Auger drive belt 49392 connects to the engine pulley to drive the snowblower attachment.
Wear work gloves to protect your hands when installing this part.
Frequently Used Together
- $2.49 |29% OFF Phone Price : $3.49
- $5.99 |14% OFF Phone Price : $6.99
- $10.89 |16% OFF Phone Price : $12.89
- $23.19 |21% OFF Phone Price : $29.19
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #486248463 Craftsman snowblower attachment | 486248463 | Housing/gear assembly |
Reviews
snowblower belt
very heavy duty.....looks like it will last for years like original
Dave, maine
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Exact part
This was exactly the part I ordered. Quick shipping roo!
Vetbill, NH
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
fit perfect and easy to install
took only 10 minutes to install very easy even with snow blower attached.
johnny b, colo.
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Easy to install
Only needed a 1/2" wrench to remove two nuts at the guard and loosen four nuts for the belt retainers at the lower pulleys, and pliers to remove the hitch pins. The tensioner has a chain that allows the idler pulley to move out of the way to capture the belt. Pull the chain for the desired tension on the belt. Replace the guard, tighten all nuts, test. Voila!
Mr. M, The D
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Arrived fast
Pretty simple to install especially if you have the manual.
Cstout, Minnesota
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
BELT INSTALLTIION
EASY TO INSTALLDTHE BELT IS EASY TO INSTALL IF YOU
vedderd, Gardners, PA
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Moderatly easy with ownwers manual as guide
replaced bearings in auger drive. Still have play in shaft even though bearing retainers are good. Is this play Normal?
Rick 4, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Belt Installation
Easy to install only took about 10 min. I also ordered the blower lift cable and installed it, took less than 5 min.
Samson, Garrett, PA
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes