Range Oven Door Outer Panel (Black and Stainless) 318299534

Range Oven Door Outer Panel replacement

Excellent product; delivered on time. We expected it to come later than it did. Very pleased.

Ease of Installation

Moderate

Duration of Installation

30 minutes - 1 hour

Replaced gas range oven door outer panel

Replaced the gas range over door outer panel. I looked up the repair instructions on the internet and followed the video. It was easy to install.

Ease of Installation

Moderate

Duration of Installation

30 minutes - 1 hour

Yes, I would recommend this to a friend

Easy to install

Easy to install...Matches perfectly...Oven Door, Just as New...REMINDER...DO NOT OVER TIGHTEN the two oven door handle screws...You will break the oven door glass...Quick Delivery, 20 minute install

Ease of Installation

Very Easy

Duration of Installation

Less than 30 minutes

Yes, I would recommend this to a friend

Not relatively easy to install

The glass shattered when I was tightening the handle Bolts, that had come loose. This is a direct result of poor design. Placing a paine of glass between 2 stainless steel panels, with insufficient lateral support, allows too much flex over the entire assembly. Not using ferrules for the handle bolts to limit the amount of distortion, in the glass paine, that they can create, is what causes the glass to break. The new panel took over 2 months, from the order date, to arrive. This unacceptable! The new assembly had the same dense, aluminum clad, fiberglass pad glued across the upper stainless steel pane as the old assembly. The fiberglass pad does not extend all the way across to provide support for the panel uder the handle Bolts. Since there are no spacing ferrules around the handle bolts, there is no support at all under the handle bolts to prevent them from warping the glass paine. I cut the fiberglass pad, from the old assembly, in half and used those pieces to extend both sides of the new pad out to the edges of the panel. This provided, at least some support under the handle bolts, to minimize the distortion created when the handle bolts are tightened. I then, carefully, tightened the handle bolts. There is still a slight bow visible across the top edge of the upper stainless steel panel. Other than compensating for the above mentioned design flaws in the outer door glass assembly, the rest of the installation was fairly straight forward. Instructions to tape the assembly in place, so the door can be opened enough to screw the top screws in, would be helpful, along with supplying adequate support for the door handle bolts.

Ease of Installation

Difficult

Duration of Installation

1 - 2 hours

Yes, I would recommend this to a friend

Range oven door, outer panel

It took 4 1/2 months to get the product I was told it was in stock. Sissy me I didn't request the screws to install the door. Now I have to order the screws.

Ease of Installation

Moderate

Duration of Installation

30 minutes - 1 hour

Yes, I would recommend this to a friend

Designed to Fail

Livid I had to pay over $300 for a door that was designed to shatter when attaching the handle

Ease of Installation

Very Difficult

Duration of Installation

Less than 30 minutes

Yes, I would recommend this to a friend

No guidance about installing major part

There were no installation instructions for this replacement part, and the original installation guide assumes that the unit comes as one piece so no instructions for part replacement there. I did check out youtube, but they only had a video for a generic model. We THINK we figured it out, but there is a space at the top of the oven door that doesn't cover the side trim pieces...not sure if that is intentional. See attached photo. Like other commenters, I'm annoyed that the glass front broke to begin with.

Ease of Installation

Moderate

Duration of Installation

1 - 2 hours

Very fast receipt of product!

While the oven door glass arrived VERY quickly, it came with no directions. I had to fool with it for about two hours to get everything right. One suggestion - for you videos and for an enclosure when sending the product, is to warn against over-tightening the two screws that hold the handle and assembly together. The original breakage occurred because our handle kept coming loose; when I tightened it the glass exploded. Apparently mine is not an isolated case.

Ease of Installation

Difficult

Duration of Installation

1 - 2 hours