CONFIRM THE PART FITS
Refrigerator Gasket Panel 2183850
Part #2183850
Part Information
Special details: Smooth folds and creases in gasket 2159060 by soaking it in warm water or warming it with a hair dryer on low heat.
This freezer door gasket (part number 2159060) is for refrigerators.
Freezer door gasket 2159060 creates a seal around the door to prevent warm air from entering the freezer compartment.
Safely store any food that could deteriorate while the door is open for this repair.
Frequently Used Together
- $104.81 |Â19% OFFÂ Was : $130.00
- $8.09 |Â55% OFFÂ Was : $18.00
- $55.39 |Â22% OFFÂ Was : $71.00
- $39.71 |Â13% OFFÂ Phone Price : $45.71
- $54.69 |Â25% OFFÂ Was : $73.00
- $63.48 |Â9% OFFÂ Phone Price : $69.48
- $42.71 |Â12% OFFÂ Phone Price : $48.71
- $44.88 |Â34% OFFÂ Was : $68.00
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #CT21GKXKT02 Crosley top-mount refrigerator | CT21GKXKT02 | Door |
Model #CT21GKXKQ02 Crosley top-mount refrigerator | CT21GKXKQ02 | Door |
Model #CT21GKXPQ00 Crosley top-mount refrigerator | CT21GKXPQ00 | Freezer door parts |
Model #CT21GKXPT00 Crosley top-mount refrigerator | CT21GKXPT00 | Freezer door parts |
Model #GT1SHWXPS00 Whirlpool top-mount refrigerator | GT1SHWXPS00 | Freezer door parts |
Model #GR2SHTXMB01 Whirlpool top-mount refrigerator | GR2SHTXMB01 | Freezer door parts |
Model #GT1SHTXMB00 Whirlpool top-mount refrigerator | GT1SHTXMB00 | Freezer door parts |
Model #GR2SHWXPS00 Whirlpool top-mount refrigerator | GR2SHWXPS00 | Freezer door parts |
Model #GT1SHTXMT00 Whirlpool top-mount refrigerator | GT1SHTXMT00 | Freezer door parts |
Model #GR2SHTXMS00 Whirlpool top-mount refrigerator | GR2SHTXMS00 | Freezer door parts |
Reviews
Outrageous shipping cost
Part fit, ez to install took almost 2 weeks to get the part after paying more than $45 for shipping
Tn313, Hawaii
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Not happy
Gasket fit, however the advice I was given as a solution was not the proper solution to my problem
DJ-CA, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Does not seem to have a good seal.
It installed fine, BUT does not seem to be tight enough. We are waiting now to see if the refrigerator quits running between cycles. It had been running continuously and were able to correct it with aluminum tape.
![Photo 2 Photo 2](http://res.cloudinary.com/powerreviews/image/upload/f_auto,q_auto,h_768,w_auto/d_portal-no-product-image_ttlfpi.svg/prod/qtifnlc0abjdtcuvjcbq.jpg)
![Seal doesn't look tight'-top and bottom. Seal doesn't look tight'-top and bottom.](http://res.cloudinary.com/powerreviews/image/upload/f_auto,q_auto,h_768,w_auto/d_portal-no-product-image_ttlfpi.svg/prod/kowamdjnlqkbimvlectz.jpg)
Big m, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Not the same as the original part
We purchased our Kenmore refrigerator in 2002. The original gasket was no longer sealing properly, so we decided to replace it. When I keyed in the part number from the manual on the Sears website, I learned that the original part had been discontinued and a substitute part was being offered as a purportedly compatible replacement. The new part was clearly NOT identical to the old one. Installation looks easy on paper but proved to be time-consuming. Instructions require removing and re-installing the door. It took nearly an hour for both of us just to get the new gasket in place. (It kept wanting to work its way loose.) After all that, it still didn't fit perfectly. Initially, it appeared to seal OK but then every time we shut the fridge door the freezer door came unsealed. It's annoying to have to recheck the freezer door every time we get into the fridge. We're keeping a strip of duct tape on the freezer door hoping that the gasket will finally conform to the right shape so the door will STAY closed. At this point, replacing the old gasket appears to be a waste of time and money. Once an original part is no longer available, buying a so-called replacement part is a real gamble!
dap27502, Apex, NC
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Easy to install just need a little patience
Take your time make it right small screw driver and rubber hammer is all it took to install
Bud33, Sturbridge Ma
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Part fit description
Worked out.perfectly! Taking out and installing new freezer gasket.
Reedsaved m, Alsip,.IL
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Not completely square, but its on & working
Shipped quickly, thumbs up. This was my first time doing this repair, it was not difficult. It took me around 30 minutes to get the gasket on. I would note, however, that like a picture frame with one piece is not exactly cut for 90 degree angles, the black vinyl cross piece for one long side, (these pieces are pushed into the outer edge of the door panel to install the gasket -- the original had only vinyl not the harder pieces) was not the exact length it should have been, it was about 1/8" too long. It made the fit at the final corner (lower left/inside) a bit awry. If the excess length overlapped the vertical it affected the seal, too thick at that point. So I pushed it up against the vertical which stretched out the seal a bit. See first photo.The gasket itself seems correct size, the other corners and sides fit well. Other than this point the gasket is on and the door seals.
![upper left, the other two looked basically like this one upper left, the other two looked basically like this one](http://res.cloudinary.com/powerreviews/image/upload/f_auto,q_auto,h_768,w_auto/d_portal-no-product-image_ttlfpi.svg/prod/mzuv0apymhma76tuqava.jpg)
![poor fit on lower left poor fit on lower left](http://res.cloudinary.com/powerreviews/image/upload/f_auto,q_auto,h_768,w_auto/d_portal-no-product-image_ttlfpi.svg/prod/f7t0mzwep34cipjotciq.jpg)
arjay7, Philadelphia
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Just what was needed
Right part for a 15year old fridge. Simple fix. Quick delivery.
4seastx, Houston, tx
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes