$5.59 |Â
15% OFFÂ Phone Price : $6.59
CONFIRM THE PART FITS
Lawn & Garden Equipment Engine Recoil Starter (replaces 695738, 696711, 798873, BS-699335) 699335
Part #699335
Online Only Price
$176.60 |Â
6% OFFÂ Phone Price : $188.60
In Stock
For ZIP codes near Edit
This part fits
Part Information
This recoil starter (part number 699335) is for lawn and garden equipment engines.
Recoil starter 699335 spins the crankshaft to start the engine when you pull the rope.
Wear work gloves to protect your hands when installing this part.
Frequently Used Together
- $11.71 |Â15% OFFÂ Phone Price : $13.71
- $24.02
- $14.43
- $9.02 |Â10% OFFÂ Phone Price : $10.02
- $106.99 |Â10% OFFÂ Phone Price : $118.99
- $18.29 |Â10% OFFÂ Phone Price : $20.29
- $161.19 |Â7% OFFÂ Phone Price : $173.19
- $7.40
- $12.61 |Â14% OFFÂ Phone Price : $14.61
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #21C114-0538-E2 Briggs & Stratton lawn & garden engine | 21C114-0538-E2 | All parts |
| Model #20M314-0927-E1 Briggs & Stratton lawn & garden engine | 20M314-0927-E1 | All parts |
| Model #15A114-0342-E1 Briggs & Stratton lawn & garden engine | 15A114-0342-E1 | All parts |
| Model #21C114-0370-E2 Briggs & Stratton lawn & garden engine | 21C114-0370-E2 | All parts |
| Model #12A113-0350-E1 Briggs & Stratton lawn & garden engine | 12A113-0350-E1 | All parts |
| Model #12R113-0734 Briggs & Stratton lawn & garden engine | 12R113-0734 | All parts |
| Model #12E114-0268-E1 Briggs & Stratton lawn & garden engine | 12E114-0268-E1 | Rewind starter/gaskets |
| Model #21M314-0641-E1 Briggs & Stratton lawn & garden engine | 21M314-0641-E1 | All parts |
| Model #21M114-0620-E1 Briggs & Stratton lawn & garden engine | 21M114-0620-E1 | All parts |
| Model #20B414-0369-E1 Briggs & Stratton lawn & garden engine | 20B414-0369-E1 | All parts |
Reviews
Great replacement, not great bolts
The replacement pull rope mechanism is perfect. My model had rivets that needed to be drilled out to remove the old one. However, the replacement bolts they give you are woefully too short to use. I had to go to a hardware store and buy longer ones and devise my own way of fastening them which took a bit of creativity since the area is very small and confined. Once put in, started up in first pull and I hadn't run it in two years. Great pet but perhaps not easy for a someone who hasn't had to work past mechanical ÒhiccupsÓ.
Dennis F, Milford, MA
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy to install so simple
Only took less than 10 minutes to install easy Peezy
Samdiy, Philadelphia PA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
fasteners not included, rivets had to be drilled
Easy install once I tapped mounting holes on snow thrower housing and provided my own 1/4 20 bolts to attach. Bolts and nuts not included as shown when ordering, self tapping bolt would have been proper since original part was rivetted to housing.
jag50, south lake tahoe ,ca
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour
Exactly what I needed
Replaced the recoil starter on my snowblower's Briggs and Stratton engine.
Miker0416, Boston, MA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Exact match, machine screws too short for snowblow
The starter assembly was a perfect match for the model #247.88999 snow thower. The machine screws provided were too short as there is a plastic trim piece that goes between the assembly and the housing. Plan to substitute longer machine screws.
AdkDoug, Adirondacks, NY
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour