$7.53 |Â
12% OFFÂ Phone Price : $8.53
CONFIRM THE PART FITS
Part Information
Special details: Before ordering carburetor 951-12705, please read the detailed information below to ensure the part number is correct for the calibration code on your carburetor.
This carburetor (part number 951-12705) is for lawn and garden equipment engines.
Carburetor 951-12705 replaces Deni carburetors with calibration code 165SB and Huayi carburetors with calibration code 165SB. If your original carburetor doesn't match the supplier and/or code, use this chart to find the correct part number.
The carburetor supplier name (Huayi or Deni) is stamped into the carburetor body, usually opposite the fuel inlet. The calibration code is the center series of numbers printed on the carburetor (starting with the 8th digit), and is sometimes also stamped into the carburetor body.
Carburetor 951-12705 doesn't include the mounting gasket. Order the gasket or gasket kit listed for your model number separately.
Let the engine cool and drain the fuel tank before installing this part. Work in a well-ventilated area and wear work gloves to protect your hands.
Frequently Used Together
- $35.94 |Â14% OFFÂ Phone Price : $41.94
- $2.91 |Â26% OFFÂ Phone Price : $3.91
- $2.99 |Â25% OFFÂ Phone Price : $3.99
- $7.63
- $7.13 |Â12% OFFÂ Phone Price : $8.13
- $4.53 |Â18% OFFÂ Phone Price : $5.53
- $353.43 |Â$12.00 OFFÂ Phone Price : $365.43
- $5.70 |Â15% OFFÂ Phone Price : $6.70
- $75.84 |Â7% OFFÂ Phone Price : $81.84
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #365-SUA MTD lawn & garden engine | 365-SUA | Engine |
| Model #370-SUA MTD lawn & garden engine | 370-SUA | Engine |
| Model #165-SU MTD lawn & garden engine | 165-SU | Engine |
| Model #31AM2N1C799 MTD gas snowblower | 31AM2N1C799 | Engine |
| Model #ZS365-SUB MTD lawn & garden engine | ZS365-SUB | Engine |
| Model #752Z365-SUB MTD lawn & garden engine | 752Z365-SUB | Engine |
| Model #365-SUB MTD lawn & garden engine | 365-SUB | Engine |
| Model #265-SU-11 MTD lawn & garden engine | 265-SU-11 | Carburetor |
| Model #265-SU MTD lawn & garden engine | 265-SU | Engine |
| Model #165-SUB-11 MTD lawn & garden engine | 165-SUB-11 | Carburetor |
Reviews
Good service
When my snow thrower would not start, I determined that I needed to rebuild the carburetor. A whole new assembly was nearly the same price as a kit. That was a good move: I found that somehow, during summer storage, a large beetle had wedged itself inside the old carburetor. Order process was relatively simple, and delivery rapid.
woodland Bruce, Hyde Park, VT
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Perfect fit
Replaced an old carb and this was an exact match. Changed them out , primed it and it fired up and ran on the third pull . A little pricey but worked perfectly!
Kelarche, Kokom, Indiana
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Snow blower carburetor
The parts department told me it would have a shut off valve, it did not. The carburetor did not come with any gaskets, that should be part of the kit. Have not installed it yet.
James R S, Anderson, Indiana
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
gets rid of the OE fluctuation
runs hotter than the OE carb. No longer does it surge, just runs clean and smooth.
throwsnow, vt
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Competitive price, delivery as promised
My carburetor went into a snowblower which had a lot of bodywork to remove before the installation. This was more difficult than the typical application
Peter 1, Plains Montana
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Snowblower
Installed today and ready for the snow. It took me about an hour and it was all going everything bolts right in thanks
Vitolo, Chicsgo
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Easy to order, easy to pay. Came quickly
Ordered, arrived quickly. Place on snow blower and easy start.
Jack, York, ME
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Part was exactly the same as the old one fit good
Took alittle time fuel had to be drained and covers taken off to install
Mike, Ny
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend