CONFIRM THE PART FITS

Line Trimmer Engine Pulley (replaces 184130) 532184130

Part #532184130

This part is no longer available.

We've permanently sold out of this part. It's no longer available from the manufacturer and the manufacturer has no substitute for this part. Although our call center staff is always happy to help when possible, they don't have access to this part. If you can't find that part and decide to replace the product, we invite you to visit www.sears.com

Part Information

This engine pulley (part number 532184130) is for line trimmers.

Engine pulley 532184130 attaches to the engine shaft to spin the drive belt and cutting head.

Let the engine cool and disconnect the spark plug wire before installing this part. Wear work gloves to protect your hands.

Reviews

Drivr pulley perfect fit
July 30, 2022

Just the right part for our craftsman 2 wheel trimmer

Greg R, Dayton. WASHINGTON

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Worked great on my older Craftsman walk behind
July 12, 2022

Worked great on my older Craftsman walk behind weed eater. I took a gamble that it was the same shaft and pulley diameter and lucked out. The old pulley that was to be swapped over to the new engine pancaked when trying to pull it off so had to buy new.

C4 A, Michigan

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes

Yes, I would recommend this to a friend

Very easy to install
July 28, 2019

Asked a friend for help because i thought it was going to be hard but it turned out easy to install

BenHur, Alamosa Co.

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
30 minutes - 1 hour
good fit
July 10, 2019

Better quality than original part old part held on by set screw this one held on by bolt

Arts p, Undisclosed

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
1 - 2 hours
Poor design
June 25, 2019

After removing protective cover, you will find that the wheels need to be removed in order to completely remove bolt so pulley can be removed. After that it was quite easy; however after that said you still need to contend with re-attaching the wheels.

cac1, Undisclosed

Did you find this review helpful?

Ease of Installation
Difficult
Duration of Installation
30 minutes - 1 hour
Easy to install
January 09, 2019

Easy to install upgraded part. Better than the original part. Trimmer now runs great even though it is an older model trimmer.

Halley, Florida

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour
The right part
August 16, 2018

Received my part the correct part with directions on removal and installation which were simple and direct.Will continue to use SEARS direct to order all parts for my equipment I own.

babejeg5, Copperas Cove

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour