CONFIRM THE PART FITS

Dryer Idler Assembly (replaces 131863000, 131863004) 131863007

Part #131863007

Online Only Price
$44.70
12% OFF Phone Price : $50.70
In Stock
For ZIP codes near Edit

Part Information

This idler assembly (part number 131863007) is for dryers.

Idler assembly 131863007 includes the idler arm and the idler pulley that maintains tension on the drive belt, allowing the belt to turn.

Disconnect the power before installing this part. Wear work gloves to protect your hands.

Reviews

Review
June 07, 2022

Delivered quickly. Perfect fit. Took minutes to install. Dryer quiet again. Very satisfied, will order again.

Robert, Iowa

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

Easy to install
March 26, 2021

It took five min. The parts fit perfectly I had no problem installing it.

Artemio, San Diego

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes

Yes, I would recommend this to a friend

Replaced this and drum bearing.
December 06, 2020

Replaced both the idler arm and rear drum bearing. All quiet now works great!

GaryS, Nevada City, Ca

Did you find this review helpful?

Ease of Installation
Easy
Duration of Installation
30 minutes - 1 hour

Yes, I would recommend this to a friend

good
April 21, 2020

Arrived in perfect condition, part looked as expected

Goldman, Pelham, AL

Did you find this review helpful?

Ease of Installation
Moderate
Duration of Installation
1 - 2 hours

Yes, I would recommend this to a friend

Dryer belt & idler pulley
November 28, 2019

Replacing belt and idler pulley should be sold as a kit since both were worn out together the idler pulley was cracked and squeaking the belt had failed

Arnie B, Mtn home Id

1 person thought this review was helpful.

Ease of Installation
Easy
Duration of Installation
Less than 30 minutes
Easy to install
November 20, 2019

It's better to disassemble whole unit, taking one's time. This way everything can be cleaned. I found the there was lint/dust packed into the blower impales. Also, the heater coils , which are mounted on the rear of the dryer need cleaning. There is a shield attached to the back of the drum, which clogs with lint...this is a fire hazard. If your going to replace main bearing and idler , take a little more time and clean the unit..I was in and out in one hour..

Napa h, Sneads ferry nc

1 person thought this review was helpful.

Ease of Installation
Very Easy
Duration of Installation
30 minutes - 1 hour
Repair made easy
March 24, 2018

The website had good expanded drawings that made the parts easy to find and helped with disassembly and reassembly. They were a little high priced, but not too out of line compared to other sites. Shipment was sent out fast and had the parts within a week. All parts were easy to install.

Idkw, California

Did you find this review helpful?

Ease of Installation
Very Easy
Duration of Installation
Less than 30 minutes