$32.00 |
16% OFF Phone Price : $38.00
CONFIRM THE PART FITS
Spiral Assembly 684-04108A-0689
Part #684-04108A-0689
Replaced by #684-04108A-0637
?
Manufacturer substitution
This part replaces 684-04108A-0689. Substitute parts can look different from the original.
Online Only Price
$90.18 |
6% OFF Phone Price : $96.18
In Stock
For ZIP codes near Edit
Part Information
This auger (part number 684-04108A-0637) is for snowblowers.
Auger 684-04108A-0637 consists of rotating blades that collect snow and throw it from the auger housing and through the chute.
Wear work gloves to protect your hands when installing this part.
Frequently Used Together
- $101.45 |11% OFF Phone Price : $113.45
- $3.00 |25% OFF Phone Price : $4.00
- $3.14 |24% OFF Phone Price : $4.14
- $19.56 |9% OFF Phone Price : $21.56
- $21.16 |22% OFF Phone Price : $27.16
- $74.45 |7% OFF Phone Price : $80.45
- $64.52 |10% OFF Was : $71.69
- $14.98 |12% OFF Phone Price : $16.98
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #CMGSB24208 Craftsman gas snowblower | CMGSB24208 | Auger housing |
| Model #31AS68EE791 MTD gas snowblower | 31AS68EE791 | Auger housing |
| Model #31AS6BEE793 MTD gas snowblower | 31AS6BEE793 | Auger housing |
| Model #31AH5DTH793 MTD gas snowblower | 31AH5DTH793 | Auger housing |
| Model #CMXGBAM1054542 Craftsman gas snowblower | CMXGBAM1054542 | Auger housing |
| Model #31AM6BHF793 MTD gas snowblower | 31AM6BHF793 | Auger housing |
| Model #CMXGBAM1054544 Craftsman gas snowblower | CMXGBAM1054544 | Auger housing |
| Model #31AH5WTG799 MTD gas snowblower | 31AH5WTG799 | Auger and housing |
| Model #31AM62EE799 MTD gas snowblower | 31AM62EE799 | Auger and housing |
| Model #31AS6WEG799 MTD gas snowblower | 31AS6WEG799 | Auger and housing |
Reviews
I had some experience, so it was fairly easy.
I spent nearly 2 hours at it, but I spent the time to clean and lube some things while I had it apart. You need to separate the auger from the rest of the machine. Then you take the pulley off the back. You don't need a puller just a wrench. Then you take the 4 bolts that hold the bearings on sides out. then it pulls right out. Remove shear pin(s) slide auger blade(s) off the end of the shaft. Now put it all back together.
Bill L, Northwest Pennsylvania.
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend