Exercise Cycle Crank Bearing Set (replaces 176991, 244513) 295560

Easy to install

Took about 30 minutes, make sure bearings are orientated right and pedals move freely

Ease of Installation

Easy

Duration of Installation

30 minutes - 1 hour

Yes, I would recommend this to a friend

Incorrect parts

When I went to install the bearing two of the four inside races where suppose to have a different Inside diameters to fit correctly. I had to use both of the old inside races in order to use these bearing. I hope they last a little while.

Ease of Installation

Moderate

Duration of Installation

1 - 2 hours

Yes, I would recommend this to a friend

Experience was an asset here.

This one takes special tools and patience. I give this one a low overall rating because of difficulty and the need for specialized tools. The outer race was easy enough to remove but the inner race was the challenge. I removed mine with a hammer and punch; it was on there very tight and it took several complete rotations before the threads started to move easy enough to finish by hand. It would have been nice if there had been some written instructions telling you where you would find left hand threads and how to adjust the bearing load. I would recommend adding additional grease - on the races before assembly and extra on the bearings too.

Ease of Installation

Very Difficult

Duration of Installation

1 - 2 hours

Yes, I would recommend this to a friend

good quality

No directions. Need to include a drawing to indicate if the bearing go in or out and a packet of heavy grease.

Ease of Installation

Difficult

Duration of Installation

1 - 2 hours

Yes, I would recommend this to a friend

If you have worked on bikes stright forward

I had to fab a simple press with a C-clamp to install the outer bearing races, as was expected. It went together very well.

Ease of Installation

Very Easy

Duration of Installation

30 minutes - 1 hour

Yes, I would recommend this to a friend

Stationary bike

This was exactly what I needed to fix my stationary bike.

Ease of Installation

Moderate

Duration of Installation

30 minutes - 1 hour

Bearings

I been using my exercise bike for many years. I always kept extra parts-including bearings-just in case they wear out.

Ease of Installation

Easy

Duration of Installation

30 minutes - 1 hour

Yes, I would recommend this to a friend

Couldn't believe Sears part direct have in stock.

Purchase bearing for my indoor bicycle form this wed site. perfectly fit. Couldn't believe they have it in stock. Only this site/store has it. Came on time. Bought parts for my washer before. Will purchase from this site again.

Ease of Installation

Easy

Duration of Installation

30 minutes - 1 hour

Yes, I would recommend this to a friend