CONFIRM THE PART FITS

Single Led M W10660728

BEST SELLER

Part #W10660728

Replaced by #W10695459
?
Manufacturer substitution
This part replaces W10660728. Substitute parts can look different from the original.
Online Only Price
$86.75 | 
6% OFF Phone Price : $92.75
In Stock
For ZIP codes near Edit
60-day return policy

Part Information

This light board (part number W10695459) is for refrigerators.

Light board W10695459 fits behind the light lens and has LED lights that illuminate the interior of the refrigerator or freezer compartments.

Unplug the refrigerator before installing this part. Wear work gloves to protect your hands.

Reviews

LED light replacement
April 09, 2022

Really easy fix just make sure you have a really thin putty knife to push in the clips to pop out the old LED light might have to cut some refrigerator foam out to get to the connector have a pair of needle nose pliers handy that's all I needed to change it took about 15 minutes

Jeff, Holbrook,PA

1 person thought this review was helpful.

Ease of Installation
Easy
Duration of Installation
Less than 30 minutes

Yes, I would recommend this to a friend

Connectors were too big to fit in refrigerator
January 08, 2022

The light I was replacing was hard-wired so I had to cut the small plug off and use the provided wire connectors. It was very hard to reach since wires are short and located back in the top of the freezer compartment. Once I finally had the connectors attached, they were too big to fit back in the recess where the light snaps in, so I had to use electrical tape to hold it in place. Light works, but it isn't properly set all the way in place.

TimD, Oregon

2 people thought this review was helpful.

Ease of Installation
Very Difficult
Duration of Installation
More than 2 hours
Wrong connector.
March 03, 2021

The picture on the internet shows that it comes with a black connector, however when the part arrived it had a white connector which would not fit into the female connector on my refrigerator. According to Whirlpool this is the new replacement part so I needed to find somebody that will solder the old connector onto the new part.

Photo 1

Tony, Johns Creek, GA.

2 people thought this review was helpful.

Ease of Installation
Difficult
Duration of Installation
1 - 2 hours

Yes, I would recommend this to a friend

Perfect replacement
September 22, 2020

Part was easy to replace. Just wish original part lasted longer than 2 years.

ejmc3, Virginia

1 person thought this review was helpful.

Ease of Installation
Easy
Duration of Installation
Less than 30 minutes

Yes, I would recommend this to a friend