CONFIRM THE PART FITS
Part Information
This oven door spring (part number WP308126) is for ranges.
Oven door spring WP308126 applies tension to the door through the hinge to help the door open and close smoothly.
Shut off electrical power to the range before repair. Wear work gloves to protect your hands.
Frequently Used Together
- $9.29 |10% OFF Phone Price : $10.29
- $41.44 |13% OFF Phone Price : $47.44
- $10.89 |16% OFF Phone Price : $12.89
- $6.29 |14% OFF Phone Price : $7.29
- $21.89 |22% OFF Phone Price : $27.89
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #RF374PXDZ0 Whirlpool electric range | RF374PXDZ0 | Oven |
Model #RF376PXDN0 Whirlpool electric range | RF376PXDN0 | Oven |
Model #RF374PXDZ1 Whirlpool electric range | RF374PXDZ1 | Oven |
Model #RF375PXDW0 Whirlpool electric range | RF375PXDW0 | Oven |
Model #RF375PXDZ0 Whirlpool electric range | RF375PXDZ0 | Oven |
Model #RF376PXDQ0 Whirlpool electric range | RF376PXDQ0 | Oven |
Model #RF364PSBQ0 Whirlpool electric range | RF364PSBQ0 | Oven |
Model #RF375PXDN0 Whirlpool electric range | RF375PXDN0 | Oven |
Model #RF376PXDQ1 Whirlpool electric range | RF376PXDQ1 | Oven |
Model #RF364PSBW0 Whirlpool electric range | RF364PSBW0 | Oven |
Reviews
Works well
My Whirlpool dual in-wall oven was not screwed to the cabinet but rather set on a shelf with rails under that the previous home owner installed it on. I had various thicknesses of 2x6 boards resting on top of a carpet remnant with face covering my hardwood floors. After flipping the breaker, I removed upper and lower doors. Upper door had 2 retention screws; bottom had none. I slid the unit forward, removed the broken spring and connected the spring anchors. I recommend buying new anchors to go with the springs as you're already that far so might as well. I then slid the unit back, installed the doors and turned power back on. Done in about 2 hours (took time fiddling with it to get it out and back in).
Chris, Sioux Falls, SD
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Super easy to install!
It took only 5 min. per side but definitely a 2 person job. One to slide out the oven and another to attach each spring using a pair of needle nose pliers.
Kendog, Parker, Co.
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes