$44.74 |
12% OFF Phone Price : $50.74
CONFIRM THE PART FITS
Part Information
This recoil starter assembly (part number 753-08350) is for line trimmers.
Recoil starter assembly 753-08350 spins the flywheel to start the engine. This assembly includes the recoil starter cover.
Wear work gloves to protect your hands when installing this part.
Frequently Used Together
- $45.62 |12% OFF Phone Price : $51.62
- $18.48 |10% OFF Phone Price : $20.48
- $19.56 |9% OFF Phone Price : $21.56
- $21.16 |22% OFF Phone Price : $27.16
- $74.45 |7% OFF Phone Price : $80.45
- $64.52 |10% OFF Was : $71.69
- $14.98 |12% OFF Phone Price : $16.98
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #316731972 Craftsman gas line trimmer | 316731972 | Short block/fuel tank/clutch cover |
| Model #41DDZ46C799 MTD gas line trimmer | 41DDZ46C799 | Short block/fuel tank/clutch cover |
| Model #316731973 Craftsman gas line trimmer | 316731973 | Fuel tank/short block |
| Model #316731702 Craftsman gas line trimmer | 316731702 | Short block/fuel tank/clutch cover |
| Model #316731703 Craftsman gas line trimmer | 316731703 | Fuel tank/shortblock |
| Model #41CDZ45C799 MTD gas line trimmer | 41CDZ45C799 | Short block/fuel tank/clutch cover |
| Model #316731933 Craftsman gas line trimmer | 316731933 | Short block/fuel tank |
| Model #316740930 Craftsman gas line trimmer | 316740930 | Short block/fuel tank/clutch cover |
| Model #41CDZ47C799 MTD gas line trimmer | 41CDZ47C799 | Short block/fuel tank/clutch cover |
| Model #41EDZ47C799 MTD gas line trimmer | 41EDZ47C799 | Short block/fuel tank/clutch cover |
Reviews
Great product
Perfect fit and easy replacement. Also was shipped quickly
Mdmills59, Winter Haven FL
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Wrong part
What I needed were the clips that engage the starter, not the starter rope. Turns out these clips are mounted to the oil assembly and I would have to buy that part just to get the clips. I need to return these starter ropes.
Duped b S, Oklahoma
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Replacement assembly is missing the Pawl
The repair was not made because the replacement Line Trimmer Recoil Starter Assembly did not include the Pawl to make it start. That is what is broken on the original starter. Have not been able to reach Customer Service.
DMPJ, Pikeville TN
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Easy as Pie
Part was exactly what I needed. I am not mechanically inclined, however I found this to be easy to install and works perfectly. Thanks
sean, WV
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Right parts on time
Perfect fit fast delivery just a good overall experience
Jhon, Omaha NE
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
2 tries
They said it was a five minute repair. Take it off put it on. The first time, that's exactly what I did. It didn't work! Took it apart again. This time I really looked at it. On the inside fan there is a small movable part. Put it in the down position. Line up the second small fixed part with the new starter cord part. One you have on, give the cord a gentle pull, to see if it catches. If it catches, your good to go. Put in the center screw above and behind the cover. (Not included with the new set of screws). Put in the four new screws. Be sure to align the bottom cover before you tighten everything down. After that give it a prime and a pull. Mine started right up. Ready to go! Hope this helps the not so mechanical inclined, like me!
Smokin12, Naples, FL
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Handy and helpful Customer Service
After a wrong part false start, the new one was a perfect fit. However, it seems the that the recoil was pulling too light and not engaging the motor properly. It took forever to get the weedwacker started, I plan to increase the springs tension by wapping the string a couple of turns on the pulley. After starting it worked well, so all in all, I am happy. I'll get credit when I return the incorrect part.
lesryaisg, Houston, Tx
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Never got complete parts
I was told the pawls come with recoil starter. after two orders arrived without the pawls. I chatted with a Manager, The solution was since they didnt put the pawls in the box twice, They were not going to try a third time, so, I should return part and contact the Manufacturer.
Rudynut, Warrenton VA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend