Can’t find your part?   Contact us:   +1-309-603-4777
Open Hamburger Menu
Sears Parts Direct
Tips to find your model number
Cart
Orders
Your models

Keep track of the models you own in your profile

Sign in or Register to view or add models

Schedule a repair
Vissani Microwave hood combos

Official Vissani microwave/hood combo parts

Vissani microwave hood combos use innovative controls and components to heat your foods evenly. Vissani microwave hood combos use sturdy parts that rarely break down. While Vissani is known for its line of dependable appliances, they need routine maintenance and occasionally need repairs. If your Vissani microwave does stop heating, trust Sears PartsDirect to have the parts you need to get your microwave cooking again.

Popular maintenance items for Microwave/Hood Combos

Parts you might be looking for

Cleaning grease filters in your Vissani microwave hood combo

  • Unplug the microwave hood combo from the wall outlet to disconnect electrical power.
  • Slide the filter to the side, pull downward and push to the other side to remove it. Repeat the process to remove the other grease filter.
  • Soak the grease filters in a hot water and milt detergent for 30 minutes.
  • Scrub grease from the filters using a soft-bristle brush.
  • Rinse the filters thoroughly using hot tap water.
  • Shake water from the filters and allow them to dry completely.
  • Reinstall the grease filters and plug the microwave hood combo power cord back into the wall outlet.

Repairing arc burn marks inside the cavity of your Vissani microwave hood combo

  • For microwaves that are not stainless steel on the inside, you can repair arc marks up to the size of a quarter using this touch-up paint, but only if the marks appear on the inside walls, the floor, or the ceiling. Don't attempt repairs on the outer frame, or the door. Any repairs to the door or frame could affect the shielding and cause radiation leaks. And don’t attempt repairs on burn marks larger than a quarter, as that could be a sign of a more serious problem and should be checked out by a service technician. Also, don't use this repair on microwaves with a stainless steel the inside, because the paint won’t stick.
  • Clean the area using soapy water and dry the spot thoroughly.
  • Sand the burnt spot down to bare metal using a fine grit sand paper. Wipe the area clean to remove any residue.
  • Apply a thin coat of microwave cavity touch up paint. Wait for 5 minutes to allow the first coat of paint to dry. Reapply a second coat of microwave cavity touch-up paint. Be sure to wait 24 hours for the paint to dry before using your microwave.