Official Frigidaire electric range parts

What to do when the coil surface element on your Frigidaire electric range isn't heating properly

A break or flaw in a heating coil can prevent the surface element from heating properly. If a portion of the element doesn't heat, replace the surface element.

Coil surface elements plug into a terminal block to get power. The element won't heat if the terminal block fails. You'll likely see the terminal block body melted when it fails. Check the terminal block and replace it if it's melted or damaged.

A faulty control switch can also cause surface element heating problems. If a surface element heats evenly but you can't control the temperature using the surface element switch, replace the surface element switch.

Frequently-replaced parts in Frigidaire electric ranges

• Electronic oven control board. The electronic oven control (EOC) board governs the timing and execution of oven functions in the range. It's usually attached to the control panel and often has a digital display clock mounted on the front of its housing.
• Outer oven door glass panel. The outer oven door glass panel is the heat-resistant piece of glass that forms the outer part of the oven door.
• Oven door hinges. The hinges on an oven door control the rate at which the door opens and also allow the door to stay open at an angle. Hinges are usually installed in pairs so the hinges and tension springs match, ensuring the smooth operation of the door.
• Oven door lock assembly. The oven door lock assembly is a safety mechanism that prevents accidental burns and oven fires by latching the door shut during self-cleaning. The door unlocks when the oven cools to a safe temperature (usually less than 200 degrees F). It's also used on ovens with the child lock-out feature. The assembly includes the lock and switches that detect whether the door is locked.
• Bake element. The bake element is at the bottom of an electric oven and provides heat for baking.