Official Yorx camcorder parts

Playing Yorx camcorder video using the audio/video cable

• Connect the audio/video cable to audio/video out jacks on your camcorder. Connect the other end of the audio/video cable to audio/video in jacks on your television.
• Turn on your television and select line input to play video from the camcorder.
• Connect your camcorder to a power source such as a battery pack, AC adapter or car battery cord.
• Turn on the camcorder power button and select the VCR or Camera playback mode on the camcorder.
• Start playback or begin recording to send the video signal to the television.

Cleaning the eyepiece on your Yorx camcorder

• Turn the camcorder power off and unplug the power cord. Pull the battery pack off the camcorder.
• Turn the eyepiece 1/8 of a turn counterclockwise to release it from the camcorder body and pull the eyepiece free from the camcorder. Set the eyepiece on a padded surface.
• Remove any lint or dust particles from the eyepiece lens using a soft, clean, lint-free cloth. Be careful not to scratch the eyepiece lens surface while cleaning.
• Clean the body of the eyepiece using a soft cloth moistened with mild detergent and water. Rinse off detergent residue from the eyepiece body using a damp cloth moistened with plain water. Dry the eyepiece body thoroughly with a dry, soft cloth.
• Position the eyepiece on the camcorder body and line up the marks on the eyepiece body with the grooves in the eyepiece receptacle on the camcorder body. Attach the eyepiece to the camcorder and rotate the eyepiece 1/8 turn clockwise to lock the eyepiece in place.