Official Dremel scroll saw parts

Replacing the blade in your Dremel scroll saw

• Unplug the power cord from the wall outlet. Wear work gloves to protect your hands.
• Remove the table insert. Release blade tension by turning the blade tension knob counterclockwise.
• Insert the blade change rod through the hold above the blade holder and loosen the hex socket screw on the blade holder. Remove the blade from the upper blade holder.
• Loosen the lower blade holder hex socket screw and remove the blade.
• Install the new blade and reassemble the saw.

How to replace the carbon motor brushes on your Dremel scroll saw

• Unplug the scroll saw’s power cord from the wall outlet. Wear work gloves to protect your hands.
• Use a slot screwdriver to unscrew the brush caps and then pull out the motor brushes.
• Insert the new carbon brushes into the motor and reinstall the brush caps.
• Plug the scroll saw into the electrical outlet and test motor operation.