CONFIRM THE PART FITS
Snowblower Auger Drive Belt, 7/16 x 30-3/8-in 3526MA
Part #3526MA
Part Information
This auger drive belt (part number 3526MA) is for snowblowers.
Auger drive belt 3526MA rotates the auger on the snowblower.
Wear work gloves to protect your hands when installing this part.
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #421 Western Tool gas snowblower | 421 | Motor mount assembly |
| Model #8875 Craftsman snowblower | 8875 | Motor mount assembly |
| Model #536886400 Craftsman snowblower | 536886400 | Motor mount assembly |
| Model #536886510 Craftsman snowblower | 536886510 | Motor mount assembly |
| Model #536884800 Craftsman gas snowblower | 536884800 | Motor mount assembly |
| Model #C950-52475-8 Craftsman gas snowblower | C950-52475-8 | |
| Model #536255280 Craftsman front-engine lawn tractor | 536255280 | Engine |
| Model #536886520-1989 Craftsman gas snowblower | 536886520-1989 | |
| Model #536884811 Craftsman gas snowblower | 536884811 | |
| Model #768884800 Craftsman electric snowblower | 768884800 | Drive train |
Reviews
Easy to install
Only took 15 minutes to install was very easy piece of cake
Perch, Grand Rapids,minnesota
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Belts were easy to install and adjust.
The installation and adjustments of the belts only took about 30 minutes.
Larry, WV
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Snowblower belt
$51.74 for an auger drive belt for a snowblower. Craftsman snowblower is up for sale. I won't purchase another Craftsman product.
09ZO6, Alaska
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
no problem
replace seven year old belts, easy enough about 20 min. done
oddball, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
It Fits my Noma 24"!
It is a bit of a challenge unless done before, but not horrible if you are a tad more than handy. I replaced the Drive Belt at the same time as both are on the same pulley shaft. Because of this it did take longer but better to replace both at the same time
SpiceMaster, Livingston NJ
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Belts were easy to install
The belts ( auger and drive) were easy to install IF they were the correct ones. I used the numbers in my owners manual and the after market replacement parts sent were not correct. Tech support is non existent. I would up going to my local dealer to get replacement belts that fit. I spent more time trouble shooting the belts than it took to remove the old ones and replace them.
Philly I, Westchester NY
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Easy install
Press the clutch in when you put the belt on the auger pulley. Makes it much easier!
Michael53, Niskayuna, NY
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Not a quick and easy process.
Directions in manual are vague as far as the amount of disassembly required to access the belts. You need to separate the two housings (rear drive housing from the front auger housing) to get at the belts and pulleys. Much easier with two people.
DIY1010, Norhteast
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 30 minutes - 1 hour