$112.87 |Â
10% OFFÂ Phone Price : $124.87
CONFIRM THE PART FITS
Part Information
This auger kit (part number 753-06469) is for snowblowers.
Auger kit 753-06469 consists of rotating blades that collect snow and throw it from auger housing and through the chute. The kit may include multiple parts; refer to your parts diagram for a complete list of parts included.
Wear work gloves to protect your hands when installing this part.
Frequently Used Together
- $4.49 |Â18% OFFÂ Phone Price : $5.49
- $6.55 |Â13% OFFÂ Phone Price : $7.55
- $24.84 |Â19% OFFÂ Phone Price : $30.84
- $150.52 |Â7% OFFÂ Phone Price : $162.52
- $12.74 |Â14% OFFÂ Phone Price : $14.74
- $27.79 |Â18% OFFÂ Phone Price : $33.79
- $5.88 |Â15% OFFÂ Phone Price : $6.88
- $4.91 |Â17% OFFÂ Phone Price : $5.91
- $19.56 |Â9% OFFÂ Phone Price : $21.56
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #247887803 Craftsman gas snowblower | 247887803 | Auger/lower handle/fuel tank |
| Model #24711683 Craftsman gas snowblower | 24711683 | Fuel tank/auger |
| Model #31AS2S1D793 MTD gas snowblower | 31AS2S1D793 | Auger & housing |
| Model #247116831 Craftsman gas snowblower | 247116831 | Lower handle/auger/fuel tank |
| Model #31AM2T6D799 MTD gas snowblower | 31AM2T6D799 | Auger/lower handle/fuel tank |
| Model #247887822 Craftsman gas snowblower | 247887822 | Auger/lower handle/fuel tank |
| Model #247116830 Craftsman gas snowblower | 247116830 | Auger housing/fuel tank/wheels |
| Model #247887800 Craftsman gas snowblower | 247887800 | Auger & housing |
| Model #247887801 Craftsman gas snowblower | 247887801 | Auger & housing/fuel tank |
| Model #247887802 Craftsman gas snowblower | 247887802 | Auger housing/fuel tank/wheels |
Reviews
OEM Psrts
Easy installation of included parts, bringing equipment to as new condition.
Mark, Lowell, Michigan
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Snow thrower replacement paddles
Perfect parts that arrived quickly and easy to replace
Mike, Connecticut
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Same size as the worn out old pair
The install was easy, the fit was perfikt but after a half hour of use they're already not hitting the ground so the snow thrower isn't moving. The old ones lasted 5 years, after measuring these I found that they're the same size as the five year old ones that are worn to the point they needed replaced.
sco3tt, Michigan, us
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Easy. Fits perfect.
Put it up on a work surface so you don't have to bend over. Good time to drain the oil and gas. The gas cap vent will leak and the oil will get into the cylinder when you tip it back.
BobbyV, Lombard, Illinois
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Take a pic first
Easy to put on but you can get installed on wrong side too and have to redo. The snow scraper didnt have a center slot but a little work with power drill and it's on.
Juma3, Virginia
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
East to install - 30 min job
Easy to install 30 min job with the right tools and some elbow grease
RWLambert, Chicago, IL
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Perfect fit.
I was given this snowblower because the former owner decided to move to Arizona for the winter. The metal surrounding the back of the auger appeared rusted. Two of the 3 ordered parts arrved: auger paddles and blade. While waiting for the third item, I disassembled the auger, sanded and painted the metal, 3 coats, then reassembled with new paddles and blade. It took two days since I had to wait for paint to dry. Now i'm waiting for a snowstorm to give the snowblower a test. I only took photos after finishing the parts replacement.
MikeJ, Grand Rapids, Michigan
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
New parts
Parts fit exact. Easy to install. Everything went fine.
Mark, Boston
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend