the total install took about 30 minutes. One thing to point out about doing any thing with a water softeners is to keep in mind the unit is under water pressure. When you turn off the water source or bypass the unit you still need to release the pressure before disconnecting lines. once you have done that the lines are easy too remove. Simply remove the retaining clip and pull gently on the supply and exit lines. The old turbine and sleeve pull out by hand then you simply slide the new turbine and sleeve in. I would recommend replacing the o rings on the valve body before reattaching the supply line I use food grade lubricant on the new o rings to ensure a tight fit. lastly turn the water back on.
Ease of InstallationVery Easy
Duration of Installation30 minutes - 1 hour
verified customer
Was this review helpful?
Replacingthe resin and also other parts
August 06, 2018|Bill W, Arizona
This project replacing the resin and other parts does take a lot of time if you do it correct
verified customer