$65.17 |Â
8% OFFÂ Phone Price : $71.17
CONFIRM THE PART FITS
Refrigerator Condenser Fan EAU61884202
Part #EAU61884202
Replaced by #EAU62025701
?
Manufacturer substitution
This part replaces EAU61884202. Substitute parts can look different from the original.
Online Only Price
$76.51 |Â
7% OFFÂ Phone Price : $82.51
In Stock
For ZIP codes near Edit
This part fits
Part Information
This condenser fan motor assembly (part number EAU62025701) is for refrigerators.
Condenser fan motor assembly EAU62025701 includes the fan blade that moves air across the condenser and the motor that turns the fan blade. The assembly may include additional parts; refer to your parts diagram for a complete list of parts included.
Unplug the refrigerator and safely store any food that could deteriorate while the power is off before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $331.97 |Â$12.00 OFFÂ Phone Price : $343.97
- $112.29 |Â10% OFFÂ Phone Price : $124.29
- $394.35 |Â$12.00 OFFÂ Phone Price : $406.35
- $253.56 |Â5% OFFÂ Phone Price : $265.56
- $83.55 |Â7% OFFÂ Phone Price : $89.55
- $112.29 |Â10% OFFÂ Phone Price : $124.29
- $265.13 |Â$12.00 OFFÂ Phone Price : $277.13
- $176.03 |Â6% OFFÂ Phone Price : $188.03
- $81.95
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #79572182210 Kenmore Elite bottom-mount refrigerator | 79572182210 | Case parts |
| Model #79572063112 Kenmore Elite bottom-mount refrigerator | 79572063112 | Case parts |
| Model #79574023410 Kenmore Elite bottom-mount refrigerator | 79574023410 | Case parts |
| Model #79572183314 Kenmore Elite bottom-mount refrigerator | 79572183314 | Case parts |
| Model #79572042313 Kenmore Elite bottom-mount refrigerator | 79572042313 | Case parts |
| Model #79574032410 Kenmore Elite bottom-mount refrigerator | 79574032410 | Case parts |
| Model #79574024412 Kenmore Elite bottom-mount refrigerator | 79574024412 | All parts |
| Model #79574025411 Kenmore Elite bottom-mount refrigerator | 79574025411 | Case parts |
| Model #79572063111 Kenmore Elite bottom-mount refrigerator | 79572063111 | Case parts |
| Model #79572063315 Kenmore Elite bottom-mount refrigerator | 79572063315 | Case parts |
Reviews
Direct replacement works great!
We had the Er CF error on our 795 series Kenmore Elite refrigerator. After measuring voltages on the 3 pin connector to the condenser fan, according to the service manual, a new fan was needed.
Travis, Show Low AZ
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Medio
Muy dif'cil de instalar, los que arman los refrigeradores hacen las cosas complicadas para que uno les llame, pero con paciencia es posible se tiene que quitar el condensador para poder liberar el cable.
Cesariux, Los angeles
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
Website provides wrong part number for my model
I'm sure this fan is fine but The website said this was the fan for my model of fridge but it is not. My model is 79574025412. I actually needed EAU63103301. Wasted a week on the wrong part. Been waiting a week on the correct part and still don't have it.
Brad M, Missouri
1 person thought this review was helpful.
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Not hard, just confined space.
Installing the fan is a little tricky finding just the right way to slide it in. Running the wires a bit tricky due to limited space. All in all about a 20 minute job. Part worked well and now my fridge is happy!
LeftSeat, Ft. Worth, TX
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Parts were as expected
Part was great, no issue. However installation was not as Service Manual describes. To remove the fan assembly you need 2 remove the condenser because there's two lines in the way if the fan mount, not 'a couple screws' as the manual describes. 'Screw' that- it took 2-3 hrs of squirming, twisting, cautioness, swearing, and a myriad of screwdrivers to get the bracket loose, move it into 3 different angled positions to get the fan holder unscrewed (4) from the bracket, and then the fan itself unscrewed (4) from the fan mount. All with as much pleasantly as hanging upside down installing an '8 track' under your dashboard. meanwhile having to remove/move aside some item that looks like it shouldn't have been moved (copper sensor tubing and whatnot running to it.) And THEN reassemble while dropping silicone rubber grommet isolators, TINY fan screws, mounting screws etc into the abyss of the condensate pan and rolling under the condenser. This particular LG model is a BEAR, not as YouTube shows for LG fan replacement. Then figuring out there's NO WAY to run the 3-wire fan cable and HUGE plug in the same location as the original (behind the condenser) so had to clip off the old just to get it out from the fraction of a mm space behind the coils and pull it out. Then find another safe route to run the new cable. 'Not fun but she's done.'
K-Mann, NC
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Slightly difficult to install
Wiring was difficult to access. Rerouted and it worked!
Armorq, Hiawassee, GA
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Moderately easy to install.
20 min install. Do not try to remove entire fan frame, it's blocked by the refrigerant tubing connecting the condenser to the coils. Snip the zip-tie to release old fan motor wiring from fan frame. Snip the wire off the old fan motor. Unplug fan wiring from socket on right side of condenser coils. Pull the old wire out from right side of coils(it's routed behind coils) and discard. Using a very short screwdriver, remove the 4 screws from the rear of fan motor (at the hub). This releases the old fan motor & blades from the frame. Discard old motor & blades. Attach new fan motor/blades using the 4 screws removed earlier. Route the wiring above the condenser coils, to the socket and plug in (it's too hard to route wire behind coils like factory install).
EZ-LEE, White Plains, NY
5 people thought this review was helpful.
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Not difficult but slow to install, tight fit
Condenser fan wireing runs across the rear of condenser, made job alot simpler by rerouting wireing safely across front of condenser. Saved a lot work and time.
Bullet 1, Georgia
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour